12v LED lights/Lead acid battery help | on ElectriciansForums

Discuss 12v LED lights/Lead acid battery help in the Lighting Forum area at ElectriciansForums.net

O

Outofphase

Hello all, this is my first post so please don't grill me too soon ;)

So I've finally got mains in my shed after a few years of using 12v lighting and rolling the extension lead out when required. For a year or two, I have been running 6 x 4.5w LED clusters as main lights using a pair of 12v 17ah Sealed lead acid batteries in parallel. I disconnect and charge the batteries individally on a dedicated 2A charger.

However, since I now have mains (but still want my batteries as backup), I want a way to charge my batteries in-situ. From what I read online, a regulated 13.8v supply can be left indefinitely on a 12v SLA to keep it topped up. I could easily make up a 230v - 13.8vdc supply but I don't want a shed full of hydrogen if I leave it on too long :eek:

Another idea was to have a 12v power supply and a DPDT switch to select between battery and 'mains' power. I would still have to charge my batteries, just not as often.

I have a good understanding of this kind of thing, but a little guidance wouldn't hurt :D

Would a constant 13.8v supply to the batteries kill them?
 
Bung a solar panel on the roof with a charger and let that do the job.
 
Cheers Pat. I did look at solar panels a while ago, but my shed is under a shaded area and wouldn't get the sunlight too well. I don't mean to reject the idea, I would just rather go for the dependability of a mains-powered device.
 
As an eBay Associate we earn from qualifying purchases.
I should've mentioned I would like to be able to fit it into a small enclosure (188x120x53 to be precise) and be able to turn it on/off using a toggle switch. I'm trying to keep it diy. Would the 13.8v power supply be a bad idea? I found a lot of chargers switch to 13.8v once the battery is charged. I have a variable DC power supply circuit already, just need reassurance that I won't blow anything up by leaving it on my batteries.
 
Would a constant 13.8v supply to the batteries kill them?

Worth checking the manufacturer's data sheet for the batteries in question. It should say what the recommended long term trickle charge voltage is. After all, there are quite a few devices which stay permanently on charge (eg alarm systems).
 

Reply to 12v LED lights/Lead acid battery help in the Lighting Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Sticky
  • Article
Wicked I've just actually looked through it and it's very smart. Some good stuff in it. There's a tile association company that do a magazine...
Replies
2
Views
362
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
328
  • Article
Hi everyone, Another weekend, another sale! Get ready for colder days with Haverland Radiators, combining efficiency with modern design. Keep...
Replies
0
Views
371

Similar threads

24v lead acid chargers are commonly used in the medical/nursing/care home world. Most patient hoists are 24v lead acid. Also powered wheelchairs...
Replies
2
Views
420
Hi all, I have a couple of questions I'm hoping you can help with. I have put a solar panel on my kids play house which charges a 12v battery. I...
Replies
0
Views
343

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top