150m Cable run outside to spur?

[Connor2425]

Voltage 12VDC
Current (Max) 1.5A
Current (Min) 0A
Load Regulation +/-3.75%
Over Voltage Protection 15VDC
Over Current Protection 3.2A Max
Short CircuitPotection Yes
Ripple Voltage (L.F) 100mV p-p
O/P Connector N/A
S
a
f
e
t
y
Hi Pot Test I/P-O/P 3KVAC
Insulation I/P-O/P 7Mohm Min
Temperature
Operating 0 to 40’C
Storage -20 to 70’C
H
u
m
i
d
i
t
y
Operating 35% to 85% Non Condensing
Storage 5% to 95% Non Condensing
I
n
p
u
t
Voltage 90 to 264VAC
Frequency 47 to 63Hz
Current RMS (Max) 680mA Max
Inrush Current 60A Max
Leakage Current 0.25mA
Efficiency (Min) 70% Min
I/P PLUG TYPE (2Mtr Mains Lead) N/A
MTBF 50K Hours
Designed In Accordance With:
Safety Standard IEC 60950-1
EMC Standard EN 55013 EN 6100-3-2 EN 61000-3-3 EN 6100-6-1

 

[happysteve]

Happysteve its more the fact that you was trying to help

So were the others. They were asking for more information, in the main. Without knowing more details, they can't advise properly.

(And so to bed.)

 

[ipf]

We can all see where the assumptions are coming from.

 

[ipf]

Voltage 12VDC
Current (Max) 1.5A
Current (Min) 0A
Load Regulation +/-3.75%
Over Voltage Protection 15VDC
Over Current Protection 3.2A Max
Short CircuitPotection Yes
Ripple Voltage (L.F) 100mV p-p
O/P Connector N/A
S
a
f
e
t
y
Hi Pot Test I/P-O/P 3KVAC
Insulation I/P-O/P 7Mohm Min
Temperature
Operating 0 to 40’C
Storage -20 to 70’C
H
u
m
i
d
i
t
y
Operating 35% to 85% Non Condensing
Storage 5% to 95% Non Condensing
I
n
p
u
t
Voltage 90 to 264VAC
Frequency 47 to 63Hz
Current RMS (Max) 680mA Max
Inrush Current 60A Max
Leakage Current 0.25mA
Efficiency (Min) 70% Min
I/P PLUG TYPE (2Mtr Mains Lead) N/A
MTBF 50K Hours
Designed In Accordance With:
Safety Standard IEC 60950-1
EMC Standard EN 55013 EN 6100-3-2 EN 61000-3-3 EN 6100-6-1

Answers nothing

 

[Darkwood]

Voltage 12VDC
Current (Max) 1.5A
Current (Min) 0A
Load Regulation +/-3.75%
Over Voltage Protection 15VDC
Over Current Protection 3.2A Max
Short CircuitPotection Yes
Ripple Voltage (L.F) 100mV p-p
O/P Connector N/A
S
a
f
e
t
y
Hi Pot Test I/P-O/P 3KVAC
Insulation I/P-O/P 7Mohm Min
Temperature
Operating 0 to 40’C
Storage -20 to 70’C
H
u
m
i
d
i
t
y
Operating 35% to 85% Non Condensing
Storage 5% to 95% Non Condensing
I
n
p
u
t
Voltage 90 to 264VAC
Frequency 47 to 63Hz
Current RMS (Max) 680mA Max
Inrush Current 60A Max
Leakage Current 0.25mA
Efficiency (Min) 70% Min
I/P PLUG TYPE (2Mtr Mains Lead) N/A
MTBF 50K Hours
Designed In Accordance With:
Safety Standard IEC 60950-1
EMC Standard EN 55013 EN 6100-3-2 EN 61000-3-3 EN 6100-6-1

Now thats overkill ... you still haven't told us what the load is>??? Lighting?

PS my bedtime !

 

[Connor2425]

Blown away with how helpful this forum has been tonight.

Its this simple, 2 people supplied quotes with 2 different cable sizes on.

I wanted some helpful suggestions on what size is suitable, I have gievn you all the relevant info.

 

[Plonker 3]

Yet we still dont know type of cable you are installing, so i would say you haven't provided all the relevant information yet.

 

[Connor2425]

Ill leave it, going round in circles and 2 late.

 

[Plonker 3]

Trust me I know the feeling!

 

[Gazthesparky]

Blown away with how helpful this forum has been tonight.

Its this simple, 2 people supplied quotes with 2 different cable sizes on.

I wanted some helpful suggestions on what size is suitable, I have gievn you all the relevant info.

Well what are the 2 sizes of cable that have been quoted for ?

if you list these we can give advice as to which size would be suitable

 

[Connor2425]

16mmSWA

10mmSWA

 

[Darkwood]

On a further note ... if you have 2 quotes with requested cable size differences ask the companies with the largest cable why it need to be that size and not the size of the other quotes .... if they give you a calculation throw it on here and we can confirm it this.. but youll be surprised how many legit companies think running standard twin and earth outside is ok i would be doing this in SWA so look to this on the quote although your determination to seek the answer and from previous threads you have started are you sure your not doing this yourself??? You must have loads of contacts by now to give you assistance.... just saying

 

[Connor2425]

On a further note ... if you have 2 quotes with requested cable size differences ask the companies with the largest cable why it need to be that size and not the size of the other quotes .... if they give you a calculation throw it on here and we can confirm it this.. but youll be surprised how many legit companies think running standard twin and earth outside is ok i would be doing this in SWA so look to this on the quote although your determination to seek the answer and from previous threads you have started are you sure your not doing this yourself??? You must have loads of contacts by now to give you assistance.... just saying

I never said I was doing this myself, you are assuming it.

I have been asked by my customer (whom I am installing a cctv system with poles remote in a yard, hence the external power source) if I can take care of the electrical side, so i am getting quotes to do this.

I have been given 2 cable sizes over that distance, I wanted advice off other sparks on that distance, if its not possible fair enough.

 

[Plonker 3]

So all the power supplies are different distance from the source?

 

[Connor2425]

I have rang a couple of elec friends which have said 6mm? So thats why im here at 1.40am, shouldnt of bothered

- - - Updated - - -

So all the power supplies are different distance from the source?

No one location