1711 megger | on ElectriciansForums

Discuss 1711 megger in the Electrical Tools and Products area at ElectriciansForums.net

Joined
Nov 28, 2019
Messages
18
Reaction score
2
Location
London
Hi, I have the opportunity to buy a new 1711 mft for ÂŁ465, I only do domestic so happy with this model but wanted to know if I should bite his hand off or look around, cheers for advice
 
I snapped up a 1731 for similar price secondhand, I would look around first, you might get a little better for your money, that said the 17xx series aren't bad apparently
 
Only downside it is not rechargable. Price sounds good to me. Inc or plus vat?
ÂŁ465 all In mate, not too fussed about rechargeable, my current fluke isn't and doesn't cause me much stress
[automerge]1578253724[/automerge]
non rechargeablr lithium batteries last well. my last lot bin in 6 months,
Yeah rechargable won't be the deciding factor mate
[automerge]1578253785[/automerge]
I snapped up a 1731 for similar price secondhand, I would look around first, you might get a little better for your money, that said the 17xx series aren't bad apparently
I've looked at lots 2nd hand and have nearly gone for some but stress myself out that the one I buy will be the dud with about 3 tests left in it!!
 
ÂŁ465 all In mate, not too fussed about rechargeable, my current fluke isn't and doesn't cause me much stress
[automerge]1578253724[/automerge]

Yeah rechargable won't be the deciding factor mate
[automerge]1578253785[/automerge]

I've looked at lots 2nd hand and have nearly gone for some but stress myself out that the one I buy will be the dud with about 3 tests left in it!!

Arguement sake you get a dud, send off to Megger for an all in repair (ÂŁ250? Correct me chaps), and you're in the ballpark of a new 1 either way.
 
go for the 1711 at ÂŁ465. you'll not be disappointed. megger built to last.
 
So are you saying go new?

I'm saying you can go either way, I'd get it, calibrate it and use it (if it is a dud on arrival then you may have recourse for a refund (PayPal protection if on eBay)
When I got mine (like you I was sceptical about shelling out for a potential dud), I asked opinion on here, thought about it logically (400~ for a ~1500 machine) and took the plunge.

When it got here, I got it on, did a few tests at home, satisfied it worked and now saving up to get it calibrated and if needed repaired, sure I may not use it in anger for a while but I've got time to play with it, discover it's limitations etc and fore that's worth the saving.

Jump on eBay, there are 1721s for less than you're looking at paying for the 1711 "Megger 1721" as the search term
 
I'm saying you can go either way, I'd get it, calibrate it and use it (if it is a dud on arrival then you may have recourse for a refund (PayPal protection if on eBay)
When I got mine (like you I was sceptical about shelling out for a potential dud), I asked opinion on here, thought about it logically (400~ for a ~1500 machine) and took the plunge.

When it got here, I got it on, did a few tests at home, satisfied it worked and now saving up to get it calibrated and if needed repaired, sure I may not use it in anger for a while but I've got time to play with it, discover it's limitations etc and fore that's worth the saving.

Jump on eBay, there are 1721s for less than you're looking at paying for the 1711 "Megger 1721" as the search term
Cheers for taking the time for the reply mate, I'll take a look
 

Reply to 1711 megger in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
380
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
956
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Hi I thought it was with amendment 2? Haven’t double checked.
Replies
3
Views
1K
Hi Richard Thanks for the reply, it won’t function as it will with the MFT1741+ but will I be able to use the MFT 1721 and perform all the...
Replies
2
Views
2K

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top