19th edition....................! | on ElectriciansForums

Discuss 19th edition....................! in the UK Electrical Forum area at ElectriciansForums.net

HappyHippyDad

-
Esteemed
Arms
Supporter
Joined
Dec 18, 2011
Messages
5,295
Reaction score
6,535
Location
Gloucestershire
I was wondering when the 19th was due to be brought out so I contacted the IET.

I wasn't expecting the reply I got (see attached letter from the IET)

What does everyone think about this?
 

Attachments

  • IET-BS7671.pdf
    103.7 KB · Views: 179
Actually I understood from the last proposal for comments (which closed a few weeks ago) that since the 18th came out in 2018, the next one wouldn't be the 19th, but would be the 25th in order to match the year. (Thus removing the ammendment 1.. 2..3 process we have now)

So simply every year following, the standard to be used would be the same as the year installed.

That way if you are planning an installation in 2028 - then you would just need to use edition 28 .

The JPEL comments for the 2025 (25th edition) closed in early March for the edition to be issued by September in order for people to get re-qualified in time for 2025.

It doesn't really matter to me now I have retired, so I didn't bother with comments, the introduction of AFDs on every circuit including retrospective on previous editions seemed excessive, but I am out of the game now, so who cares...
 
Last edited:
So the process has been taken over by money. BSI/IET get to sell a new book each year. The scams get to charge for update training/recertification each year. The manufacturers get to throw in new expensive requirements each year with, it looks like, little by way of cost/benefit analysis. And for anyone using software for form filling, software uodates to cover the changes.
Winners all round except for the users who have to pay for it all and the sparkies on the front line who have to explain why costs have gone up so much. And on that last bit, will that include ...
Sorry, that new CU I had to fit 2 years ago will need replacing again. New regs, retrospective, and can't fit the new requirements* in your "old" board. Yup, can see that being popular.
* Just going from comment above that AFDD will be required and retrospective.
Going to be an expensive business too - LiVE compact RCBO, CIRCA £10; AFDD+RCBO circa £80. So adding around £500 to a grand to an install for an unquantified benefit.
 
It make me laugh when the donkey has kicked the door open and run off, why is that the IET works backwards, regarding up dates or other, why don't they think before the new regulations come out and stand over a cyistal ball, they might need that in the future. Or does it take a donkey not to run after the carrot.
 
It has gone midday, so I must own up to my foolish prank on April 1st 😀
Took a while to get the letter looking at least half decent.
I hope it didn't scare too many of you 😅
Sorry!
 
It has gone midday, so I must own up to my foolish prank on April 1st 😀
Took a while to get the letter looking at least half decent.
I hope it didn't scare too many of you 😅
Sorry!
When I first read it this morning I thought what are they doing then I noticed the date

While you may consider it a prank have you thought you are just GIVING THEM and the scams ideas which I'm sure their bean counters would approve of and I wouldn't put it past them to try something like this :)
 

Reply to 19th edition....................! in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
380
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
957
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Good point they may well have put the control through a main contact.
2
Replies
20
Views
520
Just to say that the description of that safety bulb-holder does confirm if you take the bulb out, the pins are not live, even if the switch is...
Replies
11
Views
668

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top