2 core for 4 inch fan wiring | on ElectriciansForums

Discuss 2 core for 4 inch fan wiring in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

Wilson12

-
Trainee
Joined
Nov 15, 2015
Messages
133
Reaction score
3
Location
London
Hello I’m starting off doing jobs for myself and I’ve come across a bathroom with lack of ventilation ...
The fan in place is a 4inch fan tight to the ceiling corner.
It’s fed from the light in two core to a isolation switch and transformer in the kitchen behind the fan.

Currently it’s fed in two core on the switch line so The fan has no over run
Is there any fan I can get that dosnt just work when the light is on ?
I can make the switched line permanent by connecting it to the looo at the light fitting
 
You can get fans will pull cords.
 
Upvote 0
I thought that too, but was unsure form description if tight in corner on the ceiling or, tight in corner upto the ceiling.

Down to the OP to decide if a pull cord is suitable for the install mate. Just giving another option.
 
Upvote 0
Hello I’m starting off doing jobs for myself and I’ve come across a bathroom with lack of ventilation ...
The fan in place is a 4inch fan tight to the ceiling corner.
It’s fed from the light in two core to a isolation switch and transformer in the kitchen behind the fan.

It's a 12 volt fan the transformer has the run on timer if it's not running on check the transformer

Currently it’s fed in two core on the switch line so The fan has no over run
Is there any fan I can get that dosnt just work when the light is on ?
I can make the switched line permanent by connecting it to the looo at the light fitting
 
Upvote 0

Reply to 2 core for 4 inch fan wiring in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
382
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
963
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Question
It would normally be the outer terminals where the flex of the pendant drop connect.
Replies
3
Views
1K
"It works" and "it's safe" are not necessarily the same thing. With DIY work, they are often far from the same thing.
Replies
7
Views
732

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Electrical Courses

This is the main Electrical Courses at ElectriciansForums.net. Find local recommended electricians courses. Avoid training "company" scams. Always go view the training centre before booking any electrical courses.
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top