220 Volt single phase Contactor relay controlled by 2 switches

[Batdevice]

Hi,
I am looking for help wiring a 220 Volt single phase Contactor relay that has a single A1 Coil terminal to be used with 2 float switches to control a pump. I know how to connect a single switch to the relay but unsure how to add the second switch. Each switch can be Normally open or normally closed. Any help would be greatly appreciated.
Thank you in advance.

 

[dmxtothemax]

Tell us more about the pumps ?
can they both be on together for instance ?

 

[timbobelfast]

Hi,
I am looking for help wiring a 220 Volt single phase Contactor relay that has a single A1 Coil terminal to be used with 2 float switches to control a pump. I know how to connect a single switch to the relay but unsure how to add the second switch. Each switch can be Normally open or normally closed. Any help would be greatly appreciated.
Thank you in advance.

Can you not wire the two float switches in parallel with the contactor coil?

Any drawings for this set up?

 

[ElectroChem]

The biggest question for me is what arrangement the two float switches are in. Is there a low level switch to turn the pump on then a high level to turn it off? If that's the case then I'm afraid a single pole contactor will not be enough, you'll need a latching contact.