30mm channeling chisel?

[Colin33]

I've just had to return an Armeg 30mm channeling chisel because it snapped after 5 minutes use. The last one I had didn't fair well either, and at £40 + I'd expect them to last! Does anyone know of any other manufacturer of these, don't really want another Armeg because they are not the quality they used to be...

 

[loz2754]

I've just had to return an Armeg 30mm channeling chisel because it snapped after 5 minutes use. The last one I had didn't fair well either, and at £40 + I'd expect them to last! Does anyone know of any other manufacturer of these, don't really want another Armeg because they are not the quality they used to be...

Mine just snapped yesterday. And the previous one snapped about a year ago. Must be a weakness.
I've looked but not found an equivalent...

 

[SJD]

Mine also snapped yesterday! To be fair, the SDS drill and the chisel shaft were getting somewhat hot, I try not to use these chisels for too long a time in one go (I seem to break at least one a year).
Reluctant to pay £40-odd, I ordered this yesterday: 30mm SDS Plus Channelling Chisel Electrical Wires & Cables: Amazon.co.uk: DIY & Tools - https://www.amazon.co.uk/dp/B008JBHKAU/ref=pe_27063361_485629781_TE_item but no idea how it will compare.

 

[loz2754]

Mine also snapped yesterday! To be fair, the SDS drill and the chisel shaft were getting somewhat hot, I try not to use these chisels for too long a time in one go (I seem to break at least one a year).
Reluctant to pay £40-odd, I ordered this yesterday: 30mm SDS Plus Channelling Chisel Electrical Wires & Cables: Amazon.co.uk: DIY & Tools - https://www.amazon.co.uk/dp/B008JBHKAU/ref=pe_27063361_485629781_TE_item but no idea how it will compare.

Just read the reviews:

The worst Tool and the worst delivery
Reviewed in the United Kingdom on 18 March 2014
Moorcut Direct Ltd delivered this tool two days late which had serious repercussions on my business and resulted in time penalties, I was forced to go out and buy the same tool by different manufacturer which is still going months later after very heavy usage. unfortunately the tool bought from Moorcut Direct Ltd when it eventually arrived was going to resold to my mate as I didn't need it, it lasted exactly 30 minutes as the shaft broke in the SDS chuck

 

[nicebutdim]

Just read the reviews:

The worst Tool and the worst delivery
Reviewed in the United Kingdom on 18 March 2014
Moorcut Direct Ltd delivered this tool two days late which had serious repercussions on my business and resulted in time penalties, I was forced to go out and buy the same tool by different manufacturer which is still going months later after very heavy usage. unfortunately the tool bought from Moorcut Direct Ltd when it eventually arrived was going to resold to my mate as I didn't need it, it lasted exactly 30 minutes as the shaft broke in the SDS chuck

An entirely believable review and definitely not just an angry customer with high expectations ?

 

[SJD]

Just read the reviews:

The worst Tool and the worst delivery
Reviewed in the United Kingdom on 18 March 2014
Moorcut Direct Ltd delivered this tool two days late which had serious repercussions on my business and resulted in time penalties, I was forced to go out and buy the same tool by different manufacturer which is still going months later after very heavy usage. unfortunately the tool bought from Moorcut Direct Ltd when it eventually arrived was going to resold to my mate as I didn't need it, it lasted exactly 30 minutes as the shaft broke in the SDS chuck

Not worried about the delivery time, but hoping to get more than 30 mins out of it! I'll post an update after I've used it a bit, hopefully later rather than sooner!

I've got several channelling tools, e.g. the smaller Armeg one to get behind skirting boards (also expensive) but I find a cheap U-shaped / gouge one (under £10 when last bought) seems to last the longest. All the others regularly snap off at the neck.

 

[telectrix]

got a set from aldi a few years ago.1/2", 1",and 1"1/2 £7.99. used and abused. no breakges.

 

[Colin33]

Yes SJD, please update us on the quality of the new one. If it lasts over 30 minutes then that's better than the Armeg!

 

[Colin33]

got a set from aldi a few years ago.1/2", 1",and 1"1/2 £7.99. used and abused. no breakges.

I have those, but they don't include a 30mm channeling chisel, just a gouge tool which is pretty useless when you're cutting out for 30mm conduit...

 

[DefyG]

Usually De-Walt and Hilti (Found the DW ones to be surprising good with longevity).
Tried Makita but it didnt last too long (wear)!

 

[Colin33]

Usually De-Walt and Hilti (Found the DW ones to be surprising good with longevity).
Tried Makita but it didnt last too long (wear)!

Didn't know Dewalt or Hilti did a 30mm channeling chisel. Where can I get one?

 

[SJD]

Didn't know Dewalt or Hilti did a 30mm channeling chisel. Where can I get one?

I'd be interested to know also, as a DeWalt fanboy, I'd definitely try one if it exists.

 

[loz2754]

DeWalt only do the gouging chisel with the rounded back. 22mm.

 

[DefyG]

Ah! saw posts discussing 1/2" upto 1.1/2" widths didnt see post specified 30mm!!

 

[loz2754]

Just read the reviews:

The worst Tool and the worst delivery
Reviewed in the United Kingdom on 18 March 2014
Moorcut Direct Ltd delivered this tool two days late which had serious repercussions on my business and resulted in time penalties, I was forced to go out and buy the same tool by different manufacturer which is still going months later after very heavy usage. unfortunately the tool bought from Moorcut Direct Ltd when it eventually arrived was going to resold to my mate as I didn't need it, it lasted exactly 30 minutes as the shaft broke in the SDS chuck

Just for fun I got one of these Moorcut ones.
I'll let you all know when it breaks