£40 hamper to the first person who finds me this ladder! | Page 2 | on ElectriciansForums

Discuss £40 hamper to the first person who finds me this ladder! in the Electrical Tools and Products area at ElectriciansForums.net

unbelievable as it seems there is regulator in regards to ladders BLMA, I used to teach this whilst at Titan ladders
 
There’s my double side 6 tread Rhinos
 

Attachments

  • [ElectriciansForums.net] £40 hamper to the first person who finds me this ladder!
    CFD3E3F4-7232-4CCA-93D5-106DD34B9A72.jpeg
    147.6 KB · Views: 42
That's not a twin though is it Richy?
Ah. I now see on closer inspection. No it isn't even though we still climb up the wrong side sometimes.
I'd just ask one of the wholesalers to get one in for you - thats what I do with Werner ladders. I've had them from CEF, YESSS and Rexel.
 

You will have to put the money for the hamper towards the ladder though
Not quite what I'm looking for @Doomed . The little platform at the top needs to be one that is for hammers, screwdrivers etc. Also, the one in your link will be too long for the van.
See my first post as to the type i am looking for, i.e both sides the same. Oh yes, and it's over £200! :D

I'm a man of my word and I genuinely will send a hamper to whomever finds one meeting the criteria in the OP.
[automerge]1601207159[/automerge]

You can get them in Ireland
Now that one is close to what I'm looking for. Just doesn't have the nice tray on top with little holes for screwdrivers, hammer etc. Also, as you say, in Ireland.
 
Last edited:
You wouldn't think it would be so hard to find a twin fibreglass step ladder in the UK!

I'm genuinely thinking of just sticking a few wooden steps on to the other side of my existing ladder!
 
Not quite what I'm looking for @Doomed . The little platform at the top needs to be one that is for hammers, screwdrivers etc. Also, the one in your link will be too long for the van.
See my first post as to the type i am looking for, i.e both sides the same. Oh yes, and it's over £200! :D

I'm a man of my word and I genuinely will send a hamper to whomever finds one meeting the criteria in the OP.
[automerge]1601207159[/automerge]

Now that one is close to what I'm looking for. Just doesn't have the nice tray on top with little holes for screwdrivers, hammer etc. Also, as you say, in Ireland.
soon make a tray to clip on. bit of 2mm ally wth the appropriate holes drilled.
 
Why do you want it just out of interest?
Good question Chris, I should have explained a little.

Every now and then I have a think about what problems I have encountered on a job and if they are recurring problems. If so, I have a think if I can make this problem go away or at least make it a little easier.

Sometimes I'm in a small area with my ladder and it is a bit of a pain to fold it up, manoeuvre it around, reopen, climb back up the right side..... and then discover 5 minutes later I need to do the same again.

All these little things add up, so I try and fix them as i go along, making life that little bit easier. Less likely to make mistakes and also perhaps leave 5 minutes earlier supping a pint just that little bit sooner :) .
 
Does a standard hop up not work in most situations? I find I only use my ladders probably 20% of the time now.
Yes, the little hop up is great and I probably use it more than the ladder, say 60% of the time, but the 40% when I use the ladder could be better with some lovely twin steps. Not essential by any means, perhaps more of a treat but one I have decided (in my mildly autistic way) that I NEED!
 

Reply to £40 hamper to the first person who finds me this ladder! in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Hope everyone has had a great Christmas and here’s hoping we all have a better new year coming our way ! Remember our riches aren’t measured by...
    • Friendly
    • Like
Replies
11
Views
515
  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
754
  • Sticky
  • Article
Thanks so much for sharing this with us! I’ll definitely take a look, it seems like there are a lot of useful and interesting products. The idea...
    • Like
Replies
5
Views
2K

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top