Advice Required - Currently Industrial Elec Eng

[RobWoods]

Hi all,

I'm new to these forums, but I thought I'd ask for help since I'm unclear on what I need to do.

I'm qualified with a HNC electrical Engineering and an NVQ level 3 in the same. I also have done a 17th edition course.

I was wondering what other courses/qualifications I would need to gain to switch to a Domestic installer.

I get asked a lot to carry out work in friends and families houses, (which I'm more than capable of doing) but I always decline due to the tighter regulations,

So my question is what else do I need to obtain to become above board?

Thanks in advance,

Rob

 

[RobWoods]

Ordered the electricians guide to the building regs and will give it a read, as for sticking with industrial, that's probably going to be the plan and do abit of installation on the side.

Cheers for the help guys!

 

[Simonslimline]

2392/3 !


2395/5 or the 2391 are the only I&T courses that are worth holding.

TBH if you can show competency it's possible to became a Domestic Installer with NICEIC,STROMA........etc having 17th edition

Getting c an g 2392 and 2393 will help also

Oh and don't forget £££££

 

[Simonslimline]

2392/3 !


2395/5 or the 2391 are the only I&T courses that are worth holding.

TBH if you can show competency it's possible to became a Domestic Installer with NICEIC,STROMA........etc having 17th edition

Getting c an g 2392 and 2393 will help also

Oh and don't forget £££££