aerial advice for block of flats.

[TJC1]

Got a block of 6 flats to do.

What is the standard set up for Aerials? Wire all points back to Center point, or take an aerial to each flat, and use a booster?

Tom

 

[Octopus]

What do the plans state?

 

[ImpededLoop]

It depends what the client wants, but often satellite and terrestrial aerials are supplied to each outlet along a single coax cable using multiplexers.

You could always run the cables and get an aerial company to supply and install the hardware.

 

[Rosco]

Is it a normal rig or is for sat aswell?
I would run a shotgun cable from the intake area to each TV point and 4 ct125 cables (for sat) and 1 normal coax (for terrestrial) and a 4 or 6mm Earth from intake area to the rig

 

[Leesparkykent]

Have a look at this thread post 5. Pretty much what @Rosco has just said above.

phone and tv in new builds - http://www.electriciansforums.co.uk/threads/phone-and-tv-in-new-builds.119488/#post-1248609

 

[Rosco]

Also make sure you label all the cables carefully save allot of messing around later on