Alternative way of chasing walls

[joelypops]

Was speaking to a mate of mine who used to be a sparky before part p etc, and he qas explaining how when rewiring a property he used to drill from the switch straight up and into the ceiling cavity above with a long masonry bit. He has just done it in his new place and although I am very impressed with how quick and mess free it is, I cant help but think it will be violating zoning regs etc. I have been through the BGB and the OSG and cant really find anything.. what are your thoughts?

 

[Jay Sparks]

If I am reading your post right, as long as the cable is running vertically up from the switch, then it is within the zone.


Jay

 

[benji]

how do you drill up from a switch

 

[Jay Sparks]

how do you drill up from a switch

With a drill...lol

Sorry benji....I couldnt help it..lol

 

[Pete999]

Was speaking to a mate of mine who used to be a sparky before part p etc, and he qas explaining how when rewiring a property he used to drill from the switch straight up and into the ceiling cavity above with a long masonry bit. He has just done it in his new place and although I am very impressed with how quick and mess free it is, I cant help but think it will be violating zoning regs etc. I have been through the BGB and the OSG and cant really find anything.. what are your thoughts?

I think he may be pulling your wire excuse the pun, to do that he must have a bleeding long flexible drill bit

 

[Pete999]

I think he may be pulling your wire excuse the pun, to do that he must have a bleeding long flexible drill bit

Could be mistaken but you are talking chasing a masonry wall aren't you?

 

[joelypops]

I will take some pics of what hes done in a bit, then try to figure out how to post them. Drill as steeply as poss from the switch position, the bit poked out in the ceiling abiut an inch away from the surfsce of the next room, if that makes sense. Meter long 16mm bit he used but says he has done it with bigger too..

 

[joelypops]

Sorry yeah 4" masonry wall

 

[Deleted member 9648]

I will take some pics of what hes done in a bit, then try to figure out how to post them. Drill as steeply as poss from the switch position, the bit poked out in the ceiling abiut an inch away from the surfsce of the next room, if that makes sense. Meter long 16mm bit he used but says he has done it with bigger too..

If it's in the next room it would need to be at a depth of >50mm at a vertical distance of 150mm from the ceiling in order to comply.

 

[Pete999]

If it's in the next room it would need to be at a depth of >50mm at a vertical distance of 150mm from the ceiling in order to comply.

Can't get my head around this mate a 4" wall and he's drilling from a switch position, which in most houses that's a lenght of about 1 mtr, what he got a sat nav guided drill

 

[benji]

iv,e drilled down blockwork walls in bungalow,s from loft to switch before

 

[camerabloke]

iv,e drilled down blockwork walls in bungalow,s from loft to switch before

Same as. I have zig zagged up a wall before but can't see it's possible to drill from switch up

 

[7029 dave]

Alternative way of chasing walls

Hammer AND bolster?

 

[Pete999]

iv,e drilled down blockwork walls in bungalow,s from loft to switch before

Me too mate but the OP is saying his mate drilled up

 

[Pete999]

Alternative way of chasing walls

Hammer AND bolster?

Yes but not like Billy from DIY SOS he used a claw hammer for Christ's sake, bound to bust your knuckles using that sort of ammer

 

[7029 dave]

Yes but not like Billy from DIY SOS he used a claw hammer for Christ's sake, bound to bust your knuckles using that sort of ammer

Ha Ha , when men where men, Pete lol

 

[J@mes]

You're never going to get the angle right on it. I reckon you'd end up in the room behind before you get to the ceiling.

 

[Pete999]

Ha Ha , when men where men, Pete lol

Still remember going home on the bus with blood dripping from my knuckles

 

[camerabloke]

Still remember going home on the bus with blood dripping from my knuckles

Shouldn't drag them on the floor then

 

[Pete999]

Shouldn't drag them on the floor then

You twot

 

[shanky887614]

Alternative way of chasing walls

Hammer AND bolster?

Grinder,safety glasses and sds drill

Stop when the dust is thick enough to cut with a knife and leave till it settles.

Then knock out with sds

 

[Chrisuk]

I want to try one of these

'The One Step Wall Chaser' - Wall Chasing with NO…: http://youtu.be/4UdZDtFi7sQ

No mess! ! !


Actually this is better

Chase Mascter Wall Chasing Specialist: http://youtu.be/s4lWqr6El9Y

**** me the floors soaked using that last one, not good