Am2 correct installation of data cable | on ElectriciansForums

Discuss Am2 correct installation of data cable in the UK Electrical Forum area at ElectriciansForums.net

X

xpepx

Hi guys

Ive never posted in the forum I'm a bit of a lurker and always been able to find what i need in a pinch thanks to alot of you guys out there.

I have tried my best searching and can't seem to find any info on the data cable installation. Now i recently took my am2 exam and passed everything except for this.

I used the compartments in the top and bottom of the dado trunking but i think i didnt install the plastic separator properly as ive never done this type of cable.

Can anyone show me a picture of how this piece should be installed as if i were to take the exam again i woukdnt want to fail the same part again ;-(

Thanks
 
Unfortunately I don't have a picture of one, however you get a small plastic cover and place it over the data cable where it travels between compartments.

I ran my data in the top and bottom compartments too, so its most likely the cover that failed you. Its just a white rectangle with no back on it
 
Unfortunately I don't have a picture of one, however you get a small plastic cover and place it over the data cable where it travels between compartments.

I ran my data in the top and bottom compartments too, so its most likely the cover that failed you. Its just a white rectangle with no back on it

Thanks for the reply

I know which piece your talking about i guessed that would be it and i used it as you said.
I must have used it the wrong way round or something. One side is shallow and one deep. I placed it so it would be deep.
 
Thanks for the reply

I know which piece your talking about i guessed that would be it and i used it as you said.
I must have used it the wrong way round or something. One side is shallow and one deep. I placed it so it would be deep.

Hi xpepx,

Sorry to drag up an old post but I’ve just failed AM2 as well on the data circuit. I honestly don’t know where I went wrong. I couldn’t see any strain relief on the back of the cat5 socket but apart from that I feel I did everything else correctly.

Any pointers would be appreciated.

Thank you.
 

Reply to Am2 correct installation of data cable in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
381
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
959
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

I guess my last post was even less direct than intended.
    • Like
Replies
11
Views
709
nicebutdim
N

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top