American Zones?? | on ElectriciansForums

Discuss American Zones?? in the Electricians Chat - Off Topic Chat area at ElectriciansForums.net

G

Guest123

Evenin all.

Was just watching CSI New York on fiveUSA, and there was a scene where one of the CSI's had to turn the circuit breakers back on after an overeload, when she found the DB she had to stand in the BATH to switch them back on!!!

God bless the Americans and their electrical standards.:D:D
 
Yeah but they only operate at 110V so they.re safe.

[ElectriciansForums.net] American Zones??
 
Evenin all.

Was just watching CSI New York on fiveUSA, and there was a scene where one of the CSI's had to turn the circuit breakers back on after an overeload, when she found the DB she had to stand in the BATH to switch them back on!!!

God bless the Americans and their electrical standards.:D:D


Electrical panels are prohibited in residential bathrooms see section 240.24( E ) 2005 National Electrical Code, but hacks are the same everywhere in the world just view pics on any electrical forum.:mad:

See this work of "art".... link to a very bad re-wire? - ECN Electrical Forums

The non- US forum there has some bad work too from all over.

Now for some good work.. NM Run With An Iron. - ECN Electrical Forums


BTW, the US uses 120V not 110V, "110V" on the label/data plate usually means it's a cheap import from China or Europe.:D
 

Reply to American Zones?? in the Electricians Chat - Off Topic Chat area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
709
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
3K

Similar threads

Ok, please be aware that I am a 'do-it-yourself-er,' so if this isn't the right place to be posting this thread, let me know where I should be...
Replies
0
Views
506
When I was on the electric board We had a pair of pillocks connect a housing estate to a very large genset, the n lead was in two parts and not...
2
Replies
28
Views
4K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top