any advice on this one

[bobby101]

3 operational factors which must be considered when carrying out a PIR

is it the correct operation of all assemblies including switchgear, controls and interlocks

or the correct operation of switches, RCD's and the correct operation of test instruments

or other ????

 

[Spa Key]

3 operational factors which must be considered when carrying out a PIR

is it the correct operation of all assemblies including switchgear, controls and interlocks

or the correct operation of switches, RCD's and the correct operation of test instruments

or other ????

Not certain at all, but I'd say it's talking about downtime, able to disconnect main earth to measure Ze, etc. Not sure though!

 

[mogga]

thats what I was thinking you need to take how intrusive the PIR will be on ocupants buisness and systems

 

[brucelee]

3 operational factors which must be considered when carrying out a PIR

is it the correct operation of all assemblies including switchgear, controls and interlocks

or the correct operation of switches, RCD's and the correct operation of test instruments

or other ????

hi mate,
think its three of these if you mean periodic inspection report
1. type of installation
2. Its use and operation
3. the frequency and quality of maintainance
4. The external influences its subjected to

pg g62 GN3
I asked this on the forum and this is the reply i got of this forum Tutor at college did not know?

 

[brucegenerator]

The results and recommendations of previous reports.