Anyone recognise this downlight/bezel?

[happysteve]

Eh up hive mind,

All I have is a photo from the client, and knowledge that it's about 90mm diameter and in a kitchen.

I've trawled through Google images, Screwfix, CEF etc and I'm slowly going cross-eyed.

Any ideas?

 

[jackhammerJIM]

looks like a jcc hybrid 7 or 9

2nd thoughts it looks more like a jcc fireguard

 

[ruston]

I thought it was one of the JCC range too.

 

[happysteve]

THANK YOU!!!

Looks like a Hybrid 7: JCC Hybrid7 Brushed Nickel IP20 Overbezel Mains Dimmable 3000K Warm White (JC99713BN) - https://www.electrical2go.co.uk/jcc-hybrid7-brushed-nickel-ip20-overbezel-mains-dimmable-3000k-warm-white-use-with-jc94213-jc94713bn.html

 

[Toneyz]

Looking at both photo's it does look like the same the only way to be 100% is to take the downlight out of the ceiling.

 

[jackhammerJIM]

Looking at both photo's it does look like the same the only way to be 100% is to take the downlight out of the ceiling.

I find this method to be very effective in the identification process

 

[jackhammerJIM]

THANK YOU!!!

Looks like a Hybrid 7: JCC Hybrid7 Brushed Nickel IP20 Overbezel Mains Dimmable 3000K Warm White (JC99713BN) - https://www.electrical2go.co.uk/jcc-hybrid7-brushed-nickel-ip20-overbezel-mains-dimmable-3000k-warm-white-use-with-jc94213-jc94713bn.html

If its worth anything to you i fitted them once and wasn't impressed

 

[stevethesparks]

Looks more like a JCC Led 3

 

[Electrical2Go]

Here's extra images of the Hybrid 7. I've checked the FGLED 3 and the bezel is not the same.

Hope this helps,

Cheers,
Ivan

 

[happysteve]

Ooh, thanks @Electrical2go Are these still available (with the cans)? I had heard a rumour that they were disontinued and only available for warranty replacements. They're to match an existing set (3 more needed).

 

[Electrical2Go]

@happysteve these have now been discontinued. However.....they have new fitting, which, from what I can see has exactly the same GU10 Overbezel/lightsource (stamped with the same code). The only difference being the Hybrid 7 was IP65 and this fitting is IP20. On the plus side they are also a fair bit cheaper! From what I can tell it's just a re-branding with IP20.

Search results for: 'jc94113led' - https://www.electrical2go.co.uk/catalogsearch/result/?q=jc94113led