Automatic wire strippers

[edexlab]

Do they do bootlace crimps as well?

I have a pair of these although just with basic Red dipped handles
They are a bit small at first but used to them now

If you have problems with your hands then these probably won't help you

I use them for the small sizes of ferrules
ie upto 1.0mm only on controls anything for power or bigger than 1.0mm I use the knipex plier type which has indents

Had lots of people say they're no good for ferrules but when pull tested they hold just as well as those done with other tools at the smaller sizes

Lots of people say the ratchet type are better I think that depends on the quality if the tool ie Weidmuller versus Ebay cheapo and also the user
If it doesn't need to be calibrated then I think I pliers types are ok

 

[Rpa07]

I use an old set of Jokaris made in ‘west Germany’ for 2nd fix and when I can’t be tugging on wires and cables.
Second photo shows the more modern type (though broken in this photo from eBay) based on the design in the first.
Work very well and just need a clean of the jaws after a while so they grip the cable.
They do hate the silicone of FP and they dislike SWA insulation. Great for singles and T +E cores.

 

[johnduffell]

I bought a set on a whim and they do a much neater job in my opinion than unzipping the CPC which some people frown on anyway. People also frown on auto strippers, not to mention that i add the milk to my tea bag before adding the water

 

[pirate]

CK, cheap and easy, don't go right into back boxes, but ideal for first dressing or simply for preparing to connect to sockets

 

[Deleted member 26818]

The best auto strippers I’ve used are a set of those cheap ones that look like a dinosaur.
Unfortunately, I attempted to use them to cut the T&E and one of the handles snapped in half.
Could be used for T&E and flex, though the length of stripped back sheath probably won’t suit many.

 

[telectrix]

one of these is essential for ringing the sheath off flex.
https://cpc.farnell.com/miller-abeco/mk02/round-cable-stripping-tool/dp/TLAB063?st=strippers

quicker than a knife and no nicked insulation

 

[GBDamo]

Nothing wrong with this bit of kit imo
https://cpc.farnell.com/ck-tools/484001/knife-electrician-s/dp/TL11642?mckv=aF9QbZTf_dc|pcrid|75385285199464|kword||match||plid||slid||pid|TL11642|&CMP=KNC-MUK-CPC-SHOPPING-M-490-Shopping-Tools+and+Maintenance-Hand+Tools&msclkid=f28fd8d40b8a11874b13843d877bd3b4&utm_source=bing&utm_medium=cpc&utm_campaign=M-490-Shopping-Tools and Maintenance&utm_term=4578984899580841&utm_content=Hand Tools

Apart from it not fitting the OPs requirements, what next, some knapped flint?

 

[GBDamo]

Top Tip..
Keep hold of them..
Don’t wait till you need them, start using them well in advance..
Especially if say, you have 200 flexes to strip and terminate a day

I got into the habit of using my CK autostrippers and use them regularly.

Pros,

Neatness
No nicks
Speed when doing large amounts.

Cons,

Can't get tight into back boxes so always leave a stump of sheath.

The wire cutters are next to useless so need two tools.

Anything above 1.5mm flex or 4mm T&E won't fit in the jaws.

Overall they are worth having and using but you have to get used to them.

 

[The Ghost]

https://www.quickwire.co.uk/product/quickwire-starter-kit/
For 2.5mm²/1.5mm²
Cable Splicer's Knife, 6-1/2-Inch - 44200 | Klein Tools - For Professionals since 1857 - https://www.kleintools.com/catalog/telecom-cutting/cable-splicers-knife-6-12-inch for anything else.

 

[ferg]

https://www.quickwire.co.uk/product/quickwire-starter-kit/
For 2.5mm²/1.5mm²
Cable Splicer's Knife, 6-1/2-Inch - 44200 | Klein Tools - For Professionals since 1857 - https://www.kleintools.com/catalog/telecom-cutting/cable-splicers-knife-6-12-inch for anything else.

That looks like a good price for the Strippers and I've been meaning to give the Quickwire jobbies a bash anyway.

The CK wire strippers are about £14 from Toolstation at the moment so I might just get both and see how they go.

I'm happy enough with the knife I have at the mo I use the Hultafors ELK and it's the dogs dangly bits.

I've tried all sorts of knives over the years and not got on with most of them but this one I can't do without.

Thanks for the replies Gents.

 

[ferg]

Nothing wrong with this bit of kit imo
https://cpc.farnell.com/ck-tools/484001/knife-electrician-s/dp/TL11642?mckv=aF9QbZTf_dc|pcrid|75385285199464|kword||match||plid||slid||pid|TL11642|&CMP=KNC-MUK-CPC-SHOPPING-M-490-Shopping-Tools+and+Maintenance-Hand+Tools&msclkid=f28fd8d40b8a11874b13843d877bd3b4&utm_source=bing&utm_medium=cpc&utm_campaign=M-490-Shopping-Tools and Maintenance&utm_term=4578984899580841&utm_content=Hand Tools

I have a knife I'm happy with TBH Pete.

Also as in the OP I need to find new methods of working to reduce the stress on my body while maintaining or increasing productivity.
At the moment I'm getting home and up in the mornings with new sore bits.

I love my job and have virtually zero transferable skills so if I want to keep up my productivity for as much of my working life as I can then changes need to be made before it's too late.

 

[LeeH]

Nothing wrong with this bit of kit imo
https://cpc.farnell.com/ck-tools/484001/knife-electrician-s/dp/TL11642?mckv=aF9QbZTf_dc|pcrid|75385285199464|kword||match||plid||slid||pid|TL11642|&CMP=KNC-MUK-CPC-SHOPPING-M-490-Shopping-Tools+and+Maintenance-Hand+Tools&msclkid=f28fd8d40b8a11874b13843d877bd3b4&utm_source=bing&utm_medium=cpc&utm_campaign=M-490-Shopping-Tools and Maintenance&utm_term=4578984899580841&utm_content=Hand Tools

Not seen one of those since college....thankfully.

 

[richy3333]

I use these. Had the previous model for years. Love them

https://www.amazon.co.uk/gp/product/B075M6WN82/ref=ox_sc_act_title_2?smid=A3P5ROKL5A1OLE&psc=1

 

[ferg]

I use these. Had the previous model for years. Love them

https://www.amazon.co.uk/gp/product/B075M6WN82/ref=ox_sc_act_title_2?smid=A3P5ROKL5A1OLE&psc=1

Crikey at that price they need to be good.
Do they give you a foot massage at the end of the day?

Joking aside do they have any limitations for day to day use?

 

[DT1991]

Hi Ferg.

I once used those CK you mention from toolstation(they could of improved the mechanism or material)

I found them to sometimes strip the inner cores whilst taking the outer sheath off. Exposing copper!(and yes they were adjusted properly)

Not everytime but sometimes this would happen. Then in the end I think the cast jaw just broke whilst stripping some 1.5 twin.

Just a heads up but for 14quid they could be worth a go for yourself.