S
Squid
Use plastic push fit pipes from the copper and just bond the copper in a convenient place.
None of this earth cable bonding on show palawa,
None of this earth cable bonding on show palawa,
Discuss Avoiding bathroom earth bonding in the DIY Electrical Advice area at ElectriciansForums.net
Reply to Avoiding bathroom earth bonding in the DIY Electrical Advice area at ElectriciansForums.net
News and Offers from Sponsors
- Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
- Sticky
- Article
Good to know thanks, one can never have enough places to source parts from!
- Electrical2go
- Forum Sponsor News and Offers
- 4
- 959
- Article
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
- Dan
- Forum Sponsor News and Offers
- 0
- 1K
Similar threads
- Question
If there's no main switch on the CU, then the RCD is doubling up as the main switch and everything is protected by it. If there is a main switch...
- Nimonic
- UK Electrical Forum
- 5
- 772
- Question
4-5 hours for 150? no chance, this is 2024, 150 for 2 hours maybe, that said an hour seems pretty quick, not sure he did the job right
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
-
help with circuit designThe 16A socket 60m away isn't too bad you should be able to get away with 4.0mm² SWA. Your...
- Latest: westward10
-
Cost of new Pumphttps://www.plumbworld.co.uk/salamander-ctforce30ps-shower-pump-30-bar-single-impeller-positive-h...- Latest: littlespark
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.