Bathroom light help please | on ElectriciansForums

Discuss Bathroom light help please in the UK Electrical Forum area at ElectriciansForums.net

Joined
Dec 4, 2017
Messages
10
Reaction score
-3
Location
Edinburgh
Ive screwed off the old light thinking it would just be a matter of screwing other straight in the same way the problem I’m having is the wires from the ceiling are too thick to fit into new light fitting, there’s 3 earth wires that we’re intertwined together but I unraveled them, I think the other is a live and 2 neutrals. Will I buy a new light?
 
Ive screwed off the old light thinking it would just be a matter of screwing other straight in the same way the problem I’m having is the wires from the ceiling are too thick to fit into new light fitting, there’s 3 earth wires that we’re intertwined together but I unraveled them, I think the other is a live and 2 neutrals. Will I buy a new light?
Got a picture of the light in question, and connections we can look at?
 
[ElectriciansForums.net] Bathroom light help please


[ElectriciansForums.net] Bathroom light help please
 
Post a photo up of the connections from the light the wife bought from Amazon.


Lads we need to help this guy out as his wife will think he's a DIY God when he gets the light working.......
Getting it working, isn't as good as getting it working safely, Go was an Alien, aint you bin watching Ancient Aliens on The History Channel?
 
You'll need a flex to some connectors (may SWD burn in Hell) or a choc block connector of some sort to get it connected.

When did the regs change from connector blocks with insulation tape around them stuffed in to the ceiling void would be fine guys?

Out of interest, that is.......
 

Reply to Bathroom light help please in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Not to mention welding switch contacts together and wondering why when they thought they had got the wiring sussed the light will still not switch...
Replies
5
Views
446
Brilliant thank you so much for your help 😊 x
Replies
6
Views
401
  • Question
Have you tried tapping the fitting with a glass hammer. I have found these fittings suspended on skyhooks before now and they just dont hang right...
    • Funny
Replies
3
Views
456
  • Question
It would normally be the outer terminals where the flex of the pendant drop connect.
Replies
3
Views
959
Thanks will give that a try in a little while Cheers Writing to say thank you very much for that advice, its worked! Really appreciate the help
Replies
6
Views
760

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks