Evening all
Ted kindly posted this link on another thread;
https://www.ofgem.gov.uk/system/fil..._licensed_electricity_suppliers_fit_16_v8.pdf
In it, there is reference to battery storage and export metering as follows;
4.31. If the configuration of the installation is such that the non-eligible electricity may be used
to calculate FIT payments, FIT licensees should conclude that any meter readings supplied would
not reflect accurately the electricity generated by the installation. An acceptable alternative is for
the generation meter to be wired after the inverter but before the battery, and to either opt out
of export or have it deemed.
4.32. If the generation meter is wired after the battery, and/or the FIT Generator is claiming
export calculated by reference to an export meter that is wired after the battery, it will not be
possible to determine that all FIT Export meter reads are in relation to electricity generated by
the FIT Installation. Because of this, FIT export payments cannot be made.
I am reading this to mean that if a system with a battery is fitted and a Smart meter is used to meter for Export (as in most cases for metered export) then no export can be claimed. Seems a bit over the top for batteries wired on the DC side only. It also means systems over 30KWp can't get export if they fit a battery system.
Any views?
Ted kindly posted this link on another thread;
https://www.ofgem.gov.uk/system/fil..._licensed_electricity_suppliers_fit_16_v8.pdf
In it, there is reference to battery storage and export metering as follows;
4.31. If the configuration of the installation is such that the non-eligible electricity may be used
to calculate FIT payments, FIT licensees should conclude that any meter readings supplied would
not reflect accurately the electricity generated by the installation. An acceptable alternative is for
the generation meter to be wired after the inverter but before the battery, and to either opt out
of export or have it deemed.
4.32. If the generation meter is wired after the battery, and/or the FIT Generator is claiming
export calculated by reference to an export meter that is wired after the battery, it will not be
possible to determine that all FIT Export meter reads are in relation to electricity generated by
the FIT Installation. Because of this, FIT export payments cannot be made.
I am reading this to mean that if a system with a battery is fitted and a Smart meter is used to meter for Export (as in most cases for metered export) then no export can be claimed. Seems a bit over the top for batteries wired on the DC side only. It also means systems over 30KWp can't get export if they fit a battery system.
Any views?