Biulding control, what a joke! | Page 2 | on ElectriciansForums

Discuss Biulding control, what a joke! in the Australia area at ElectriciansForums.net

S

sparks72

Hi gang.

Got called out to a local takeaway so see why the RCD what tripping,
the place had been refurbed a year ago, I asked the owner for the certificates so I could see what I was looking at, they were NICEIC green certs from 2001 that were issued in 2009!!!!
the shop has a flat abouve that is occupied so it falls under part P, the job has been signed off by local building control!!
The emergency lighting cert is also green, the so called electrician issued a partially filled innacurate emergency lighting periodic cert instead of an installation cert!
The electrical installation certs has also been partially filled with innacurate results!

I'll post some results from the certificates, (17th edition installation dual RCD consumer units)

Schedule of items tested: Ze.........N/A!!
Fuctional testing of assemblies............N/A!

Circuit details:
1: lighting..
Reference method: BS7671!
Max disconnection time: 0.25!
Short circuit capacity: N/A!
RCD operating current mA: N/A!
Insulation resistance: N/A except phase/earth test!
RCD operating time: 1x 35ms / 5x N/A!

All 3 ring mains have the same test results!

Regarding the tripping RCD, I noticed one of the shop down lights was flickering & could hear a crackling noise, got my steps out & took a look in the ceiling, never seen shoddy work like it, T&E cables had been stripped back about 10" & then terminated into the light fittings, the fault was a loose neutral in one of the light fittings, sorted it & informed the customer to give building control a call.

With the customers permission I called a friend who works for building control in another county to take a look around the "refurb" his exact words were........someone has taken a back hander to sign this job off!!

Now what was part P meant for again.....:confused::confused::confused:
 
I was in a house in Bolton a few months ago, It had been signed of by a Napit approved engineer.

The incoming Phase & Neutral were reversed and the Main Bonding was missing.

When I reported the engineer to Napit they said they would look into it.

I would have strung him up before the courts for making false reports.
 
sounds the same were ever you go ,loads of non scheme/approved lads issuing own EIC certs here on new builds and extensions and the council accept them.
its the biggest joke going .
why do we bother.
sooner the insurance companys pick up and make each property have certs for eleci gas or oil before cover the sooner it will become self regulating.
just don't understand why we are in this situation,no mot on yer car, insurance null and void why not the same for houses.
rant over:mad:
 
sounds the same were ever you go ,loads of non scheme/approved lads issuing own EIC certs here on new builds and extensions and the council accept them.
its the biggest joke going .
why do we bother.
sooner the insurance companys pick up and make each property have certs for eleci gas or oil before cover the sooner it will become self regulating.
just don't understand why we are in this situation,no mot on yer car, insurance null and void why not the same for houses.
rant over:mad:

:(



 
Last edited by a moderator:

Reply to Biulding control, what a joke! in the Australia area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
299
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
810
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
857

Similar threads

  • Question
Ah OK, that makes sense. Thank you Avo.
Replies
12
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top