Bootlace crimps / cutters

[Chris1234]

Are there any decent combined bootlace crimps & cutters / snips?

Thanks.

 

[Cid]

I bought this from tlc. Its good
Ferrule Kit - German Colour Scheme - https://www.tlc-direct.co.uk/Products/DVDK2G.html

 

[Charlie_]

weidmuller stripax plus 2.5
Cuts, strips & crimps
Ferrules are loaded in on a cartridge strip

 

[Dustydazzler]

This

 

[telectrix]

this is the one i bought last year. got fed up of trying to read the size of the correct bit of the jaws on the haupa ones with multiple holes
1200PCS Bootlace Ferrule Kit W/ Bootlace Ferrule Hand Crimper Crimping Tool 6492090865012 | eBay - https://www.ebay.co.uk/itm/1200PCS-Bootlace-Ferrule-Kit-W-Bootlace-Ferrule-Hand-Crimper-Crimping-Tool/292662421256?hash=item44240a2708:g:mOEAAOSw2stbmi9B

 

[LeeH]

Never seen a combined set but Weidmuller Stripax and a pair of PZ4’s are the panel mans staple.

 

[Deleted member 26818]

Are there any decent combined bootlace crimps & cutters / snips?

Thanks.

Can’t say that I’ve seen any combined cutter/crimpers.
Closest I’ve seen are these:
https://www.knipex.com/index.php?id=1216&L=1&page=group_detail&parentID=1363&groupID=1387

 

[Bobster]

Can’t say that I’ve seen any combined cutter/crimpers.
Closest I’ve seen are these:
https://www.knipex.com/index.php?id=1216&L=1&page=group_detail&parentID=1363&groupID=1387

Some of our panel builders use these, like @Charlie_ mentioned before

 

[Charlie_]

The blade under the jaws at the top of the handle cuts the wires..
I started using them a few years ago for doing all my control panels, saves me lots of time

 

[sinewove]

As a non panel wirer,whats the advantage of bootlace crimps over crimp pins?
Regards,S

 

[Deleted member 26818]

Ferrules can be used for smaller CSA conductors.

 

[Charlie_]

Bootlace ferrules are far superior, especially for tri rated singles

 

[James]

this is probably the best if you only do one conductor size, there are no changeover jaws so you buy a tool for each conductor size you want.
there is a vid on the site that shows it in operation. please note this is £1000 per size of cable.
I do A LOT of panel work and have not been able to justify the cost.

The one I use day in and out is the stripax one listed above.

https://www.phoenixcontact.com/onli...tegory_pages/Mobile_hand-held_tool_P-25-02-11

 

[timbobelfast]

Use these bad boys on a daily basis

https://uk.rs-online.com/mobile/amp...Mj8SuMLxrDY3kY5bwbQaAo51EALw_wcB&gclsrc=aw.ds

Can't speak for the machine gun self loading type. These do for most tasks. I have another set that does bigger tails like 16 - 25mm .

 

[telectrix]

Use these bad boys on a daily basis

https://uk.rs-online.com/mobile/amp/p/products/3368179/?grossPrice=Y&cm_mmc=UK-PLA-DS3A-_-google-_-PLA_UK_EN_Connectors_MOB-_-Connector_Tools_And_Accessories|Crimp_Tools-_-PRODUCT_GROUP&matchtype=&aud-358527060186la-617994355632&s_kwcid=AL!7457!3!319553178238!!!g!617994355632!&gclid=Cj0KCQjwuLPnBRDjARIsACDzGL2p1dtF6_p0Wtz7jS-Z-Pd9zbJEXjEPH9sDMj8SuMLxrDY3kY5bwbQaAo51EALw_wcB&gclsrc=aw.ds

Can't speak for the machine gun self loading type. These do for most tasks. I have another set that does bigger tails like 16 - 25mm .

mine are almost same as them, but were £14.99 with a kit of 1200 assorted ferrules included. £170+ jeez. that's a week's beer money.