Brother P-Touch label printer cartridges. | on ElectriciansForums

Discuss Brother P-Touch label printer cartridges. in the Electrical Tools and Products area at ElectriciansForums.net

I was going to post this exact question as got a Brother labelling machine. I have only used 12mm they say you can use 9mm it this true. I used to get Dyno non-genuine ones of that make and were ok for labelling up sockets but I was always dubious of the length.
 
Genuine Brother tapes but from eBay.

Just stocked up with 18mm black on yellow tape for ÂŁ7 a cassette (compared to approx. double that from Screwfix etc.)
 
Yes mate i put some thinner tape in mine this time round, i have a budget model and with the 12mm tape even with font set to small its quite large ... Thinner tape got it printing thinner... Amazon i got last ones from
I was going to post this exact question as got a Brother labelling machine. I have only used 12mm they say you can use 9mm it this true. I used to get Dyno non-genuine ones of that make and were ok for labelling up sockets but I was always dubious of the length.
 
I tried compatible ones once.. Out of three cartridges two ended up in the bin pretty sharpish as they snagged up when trying to use them. That was for a brother P Touch.
 
Compatible off Amazon can get a pack of either 4 or 5 for the price of 1 genuine from the wholesaler with no problems.
 

Reply to Brother P-Touch label printer cartridges. in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
426
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Question
Isn't it just a little sad that it should cost sooooooo much to LOG a few jobs to BC.... O where did it all go very wrong ? Signed Man in tights...
Replies
13
Views
1K
Are you sure they are back-feeding and not a legitimately grid tied system or systems with an island mode. Whilst the term is not strictly defined...
Replies
1
Views
343
davesparks
D

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top