buried boxes

[wrighty]

evening all,

im after a few pointers, could somebody suggest a decent box that can be buried under ground, im looking to install some bollard type fittings in the back garden on top of flags. im thinking of SWA in and out, flex up through flag into bollard.





cheers

 

[Geordie Spark]

evening all,

im after a few pointers, could somebody suggest a decent box that can be buried under ground, im looking to install some bollard type fittings in the back garden on top of flags. im thinking of SWA in and out, flex up through flag into bollard.





cheers

Here ye gan bonny lad: Cardboard coffins | coffins | Designer coffins ? Greenfield Creations Coffins

 

[Jay Sparks]

Here ye gan bonny lad: Cardboard coffins | coffins | Designer coffins ? Greenfield Creations Coffins

Hahahahahahaha!!! Bl00dy Geordies!!

 

[Sparky Pat]

Wiska boxws

 

[Sintra]

Personally I would fit a 20mm y box in the bollard. Don't like the idea of a flex buried and then passing through a flag stone.

 

[Guitarist]

Personally I would fit a 20mm y box in the bollard. Don't like the idea of a flex buried and then passing through a flag stone.

I did type a lovely reply, but the forum did it's usual trick of timing out on me, so I'm not typing it all again...
One word..Hi-tuff

 

[HandySparks]

I did type a lovely reply, but the forum did it's usual trick of timing out on me, so I'm not typing it all again...
One word..Hi-tuff

I'd agree, Hi-tuff is good for this application if unlikely to be mechanically damaged. I'd try to get all the terminations above ground if at all possible, even if that means choosing a different bollard light.

 

[micknew]

Buried boxes with connection in a nightmare, avoid unless you use an expensive insulating jell/compound.

 

[Geordielad]

Why not try a swa through joint buried with flex out one side as well through a conduit up to the fitting? I did this on a job when we had about 15 led up lighters per circuit to light up a tree. :-/

 

[wrighty]

not decided on a fitting yet, just going for worst case scenario, but cheers for the replys

 

[tidyboiler]

Here ye gan bonny lad: Cardboard coffins | coffins | Designer coffins ? Greenfield Creations Coffins

I know just the person to fill that !!!!!! :behead:

 

[Gazthesparky]

Here's a job I did recently using swa glanded into 20mm trouser boxes


Then bollard bolted on top

 

[Thefailsafe2012]

Here's a job I did recently using swa glanded into 20mm trouser boxes
View attachment 20322

Then bollard bolted on top

Bangin'

First time I've heard them called trouser boxes before

 

[Richard Burns]

Pratley boxes are designed for underground use and seem to work quite well (though expensive), but I agree with others, keep joints above ground if possible.

I too have not heard them called trouser boxes, but certainly from that picture it looks appropriate.

 

[tazz]

Most of our street lighting is jointed underground, and is not an issue, Good quality jointing kit using potting compound will outlast the swa.