Cable reeler help needed

[nivag]

Thorsman cablestik

Anyone know where I can buy one - mines broke and it’s the best I’ve ever had

Please help can’t seem to find one

 

[Pete999]

Thorsman cablestik

Anyone know where I can buy one - mines broke and it’s the best I’ve ever had

Please help can’t seem to find one

https://www.toolstop.co.uk/thorsman-cablestik-cable-holder-stand-p8730
Any help??????????????

 

[pirate]

Looks like it's out of stock...but a hydraulic pallet truck is offered as an alternative! That'll work...
Maybe nivag you could get someone to fix your broken one?
I guess the broom-handle through the rung of an aluminium ladder is a bit too DIY?

 

[nivag]

Thanks for the link, I found that fairly fast but they haven’t been in stock for a while.
I’ve searched and searched but I can’t find one, surly they haven’t stopped making them

It’s the pin that’s given up on mine

There so much faster than normal reelers

 

[sparksburnout]

Thanks for the link, I found that fairly fast but they haven’t been in stock for a while.
I’ve searched and searched but I can’t find one, surly they haven’t stopped making them

It’s the pin that’s given up on mine

There so much faster than normal reelers

Well stick another pin in it then FFS.

 

[telectrix]

send me a pic. i'll quote for repair. £60/hour + parts.

 

[westward10]

As above surely it is repairable.

 

[telectrix]

can't beat 2 apprentices and 6ft. of scaffold pole.

 

[sparksburnout]

can't beat 2 apprentices and 6ft. of scaffold pole.

I like the yard-brush and on-side stepladders approach personally.

 

[PEG]

Hi,which pin is it,that cannot be fixed with a 50mm M6 set?

 

[nivag]

Well stick another pin in it then FFS.

Cheers for stating the obvious captin clever, dya know never even thought of repairing it..
This one is old bent and worn. I don’t want to try repairing an already tired item to be used daily. I was looking to replace it with a younger model

 

[Resu]

We had to scour eBay and Gumtree to find additional Cablestiks.

 

[KEV 1 N]

I personally, thought those things were a load carp, they were awkward to lift and move around and often collapsed! Also if you were pulling cables off the the drum to a high up place, as the drums got lighter the bar would lift up
Best cable reeler I used was made from 25mm metal conduit and 2 angle boxes!

 

[Wilko]

send me a pic. i'll quote for repair. £60/hour + parts.

I'll subbie it for you - £8 per hour

 

[FatAlan]

Cheers for stating the obvious captin clever, dya know never even thought of repairing it..
This one is old bent and worn. I don’t want to try repairing an already tired item to be used daily. I was looking to replace it with a younger model

That’s no way to refer to your wife!