Cable spec for a factory cooler!

[Dic Penderyn]

Howz it Lads & Ladettes!

There's a huge project afoot!

No cable spec yet! Would anyone have a incline to what cable size might be required for the following Cooler for a Diary Factory?
· Model RTAC 250 HE
· Power: 628 kW
· Electrcial power unity: 253 kW
· Power engines (fans): 19,kW
· Intensisty start up: 677A
· Efficiency: 2,48
· Sound power level: 99 dBA
· Flowrate primary loop: 93.5 m3/h


:rolleyes2:!!!!

 

[netblindpaul]

More info needed before I could size this up to be honest.
However, yes I could size the supply for you.
Is this for Penderyn Whisky [Sic]?

 

[sparkiegaz]

mmm bit of juice going to that baby,,,,done few big motors up power station they pulled 640 amps , put two 240mm four core parallel feed in for them....

 

[Chr!s]

I agree with Paul, wed need more specific info to size.

 

[Knobhead]

Look at page 27 of the manual
http://www.tranehk.com/prodcat/ERTAC/RLC-SVX02D-E4_0208.pdf

 

[Dic Penderyn]

The french company Installing the plant etc.... have not provided info as of yet!

Just wanted to know what kind of cable we would be pulling in! Sounds like a big one!

Manual is a blinder Tony! Thanks buddy!

Penderyn Wisky! Nice tipple butt (Paul)!

 

[Inteificio]

I would say at least 2.5 twin and earth,

 

[Dic Penderyn]

Cheers Sparkiegaz!

That might be an Idea save struggling with one big cable! Did that reduce the cost?

 

[Dic Penderyn]

Shwmae!

Did you have a chance to look at page 27 of that manual Tony sent?

Cheers!