Calibration

[Rob Smith 643]

Having my mft calibrated next wednesday for the princely sum of £18. Oh yesss.

 

[applemac]

Bet it's a drive by! Don't even open the box just post it straight back . Good price

 

[JD6400]

Just had one of ours done last week for half price ( £45 ) . I thought that was as cheap as I would like to go , as sometimes you pay for what you get ! But if they are a proper outfit , then fair play to you .

 

[Rob Smith 643]

I also questioned the price. Its an event put on by a local wholesaler who are footing the bill for a calibration team for one day and are only seeking to cover their outlay. They've had such a good response they're considering repeating the event next year. Clearly they'll be looking to get more accounts but Ive one anyway. Bacon sandwiches included...and Ive nowt on till 11am. If it turns out to be bollox Ill let you know...

 

[GLENNSPARK]

well...you know what they says...if it sounds too good to be true n all that lot...

it wont see the rig...i can guarantee that..

a proper callibration house is supposed to let instruments settle for 24 hours in a climate controlled environment before they go near any rig...

so what did my part pis assessor think he was up to asking me if i wanted `callibration`..out of the back of his car?...

at first i thought he was asking something sexual...

 

[GLENNSPARK]

Having my mft calibrated next wednesday for the princely sum of £18. Oh yesss.

so its not just football thats in desperation then up there in sunderland is it....

 

[Rob Smith 643]

The footie has been dire for years, nay decades. Glenn, I'll take on board your climate comment and quiz the calibration dudes and see what they say. Not that I'd be too hard to baffle with science...

 

[GLENNSPARK]

The footie has been dire for years, nay decades. Glenn, I'll take on board your climate comment and quiz the calibration dudes and see what they say. Not that I'd be too hard to baffle with science...

well i would...
caus i`m tellin you now what it`l be...
they`l just dump it on a table someware...
they may get a value of loop on a known source...but i dont care what they says...it aint goin on that rig...i can assure you of that....

 

[Rob Smith 643]

Cheers Glenn. Ive fired off an email to the calibration dudes re their technique. Watch this space... Thanks again.

Rob

 

[moospark]

Who is the wholesaler Rob? Any details?

 

[Rob Smith 643]

With Glenn casting some doubt over the process I'm hesitant to mention the wholesaler in open forum. I'll pm you moospark. Rob.

 

[moospark]

Cheers Rob.David

 

[JD6400]

With Glenn casting some doubt over the process I'm hesitant to mention the wholesaler in open forum. I'll pm you moospark. Rob.

I thought from the way you ended your first post with the extended Yesss , this was your answer !?:lipsrsealed2:

 

[moospark]

Aren't they the cef breakaway?

 

[JD6400]

Apparently , but I am yet to come across them .