Cambrian Slates | on ElectriciansForums

Discuss Cambrian Slates in the Solar PV Forum | Solar Panels Forum area at ElectriciansForums.net

Joined
Sep 27, 2011
Messages
101
Reaction score
13
Has anyone done an installation on a roof finished with Cambrian Slate? I should add we will be installing on a new-build roof.
 
yes. I think you need to use genius roof solutions small flashing kit with it and grind a slot out of the tiles, but can't 100% remember.

I'd suggest they go roof integrated though.
 
New build roof?
Why would you even think of putting PV on top of it?
Cheaper and better to install an in-roof system. (ANY of them are better than on-roof)
Better looking as well.

We made a policy decision 12 months ago that we won't install on-roof systems on domestic properties any more, made our life a lot easier, and the customers are all so much happier :)
 
I have been asked to quote a 5.5kw system on a very nice looking slate roof in the west of Ireland. I do not want to have any issues so would you think removing slates and doing integrated is the answer as the weather can be brutal right on the coast. Can you PM me the system you would use? Thanks
 
Virdian, SolarCentury or GSE, are our preferred solution depending upon the configuration and roof type.
 

Reply to Cambrian Slates in the Solar PV Forum | Solar Panels Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
404
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
993
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

S
  • Article
Slate tile outdoors Been asked to repair a black/grey slate, under a covered patio. The slate has a layer of "clay" on the surface, very easy to...
Replies
0
Views
170
SYNCMANATL
S
J
  • Article
Riven Slate: use sand/cement or adhesive - is there a definitive answer Hi - my builders bedded 10-12 mm brazilian riven slate on a sand cement...
Replies
0
Views
128
Jim Rickards
J

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top