Can anyone help me with my understand of circuitry | Page 2 | on ElectriciansForums

Discuss Can anyone help me with my understand of circuitry in the Talk Electrician area at ElectriciansForums.net

These are some diagrams that may help with how lighting is normally wired.
You have the descriptions above.
[ElectriciansForums.net] Can anyone help me with my understand of circuitry
This is some methods of switching lighting:
[ElectriciansForums.net] Can anyone help me with my understand of circuitry
 
The problem with twin brown is which is which. L and S/L. you have to bell out. more time wasted.

30 year since I did my last domestic install, the then red red had a marker stripe on one core. Is it that difficult to bell out? With switch wires it doesn’t make any difference?
 
This is a bit OTT - If you open a switch and become confused by a brown sleeved conductor then you shouldn't be opening the switch in the first place!
I remember (back in the old colour days) an older guy I worked with would never sleeve R/Y/B on 2 ways - his argument was that they were already live coloured conductors.

Though one benefit with using Brown/Brown on switch drops is it makes id at light easy

A particular favourite of mine, especially when they used blue as a neutral. I've lost count how many times that a 2 way switch has been used incorrectly, then some poor sod has replaced it using "standard" wiring method - Pop!!
 
Don't they also need a BULB?! :D

Not unless your a gardener! bulbs grow lamps blow.........................sorry mate couldn't resist
 
The problem with twin brown is which is which. L and S/L. you have to bell out. more time wasted.
Plus it's considerably more expensive, and an extra roll of cable you have to carry around.
You don't use 3x brown + earth for 2 way lighting, so why use 2x brown for single way?
 
If you're presently doing a training course you can apply for access to our trainee forum. Please read this and do the necessary to gain access.

Marvo what is involved in getting in to the trainee forum to offer support to them, I have sent you a pm.
 
Marvo what is involved in getting in to the trainee forum to offer support to them, I have sent you a pm.

You have to undergo the Initiation Ceremony which involves a tub of grease. ...........

After that, you have to give a funny handshake while standing on one leg with you trouser legs rolled up.

Then you do the Hokey Cokey and shake it all about and you're in!!
 
Bet tidy boiler enjoyed that :)
You have to undergo the Initiation Ceremony which involves a tub of grease. ...........

After that, you have to give a funny handshake while standing on one leg with you trouser legs rolled up.

Then you do the Hokey Cokey and shake it all about and you're in!!
 
I may look younger, I'm still knackered!

At least I’ve still got a full head of hair! (Sort of.) SWMBO is sorting the mess the barber butcher made of it when she finally wakes up. (I’ll be asleep by then!)



Why won't the forum do strikethough in text?

You're on manoeuvres now bonny lad - or playing away from home if you like.

You're on Foreign Soil - where the forums are full of glitches .................


I have corrected your misspelled strikethrough - I will make no charge for this.
 
You have to undergo the Initiation Ceremony which involves a tub of grease. ...........

After that, you have to give a funny handshake while standing on one leg with you trouser legs rolled up.

Then you do the Hokey Cokey and shake it all about and you're in!!

I hope your not teasing me Geordie, cause that sounds like a good night
 

Reply to Can anyone help me with my understand of circuitry in the Talk Electrician area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
312
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
834
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
941

Similar threads

Hello Brianmoooore, Thanks for yor reply - Sorry that I did not see your message until today - the Forum replies notification emails about your...
Replies
7
Views
666
Seen this where T&E has been fixed with a flat bend of too tight a radius.
2 3
Replies
35
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top