can nyone help with the wiring of an immersion heater? | on ElectriciansForums

Discuss can nyone help with the wiring of an immersion heater? in the Australia area at ElectriciansForums.net

B

BenElec

Hi My name is ben in case u couldn tell from my screen name. I am a sole trader been one for a year and a half, done college and am now napit registered working with a friend. still got loads to learn could do with all the help i can get, stuck with spomethin now actually.
Need to wire an immersion heater with a thermostat and motorised valve to an existing old water tank that is being removed. I also need to connect a switched spur next to the bathroom door for the immersion and im not entirely sure what to wire it to.
Any help will be much appreciated.
Ben
 
Hi My name is ben in case u couldn tell from my screen name. I am a sole trader been one for a year and a half, done college and am now napit registered working with a friend. still got loads to learn could do with all the help i can get, stuck with spomethin now actually.
Need to wire an immersion heater with a thermostat and motorised valve to an existing old water tank that is being removed. I also need to connect a switched spur next to the bathroom door for the immersion and im not entirely sure what to wire it to.
Any help will be much appreciated.
Ben


A little clarification needed please Ben

You are wiring to an immersion tank that is being removed? Or do you mean wiring to its replacement?
What is controlling the motorised valve?
Not sure about the fused cu do you mean where should you pick up the supply from?
 
Rewiring its replacement. There is no power there at the moment i need to supply power from somewhere. There is a junction box next to the old immersion heater with 2 red wires and 1 black. They lead to a controller that has a 13A fused spur next to it that switches the boiler on.
 
Is this immersion heater,an element in the tank that heats the water
Is the motorised valve for diverting heat to rads or domestic hot water
Is it an electric boiler system
Is there a gas combi boiler or such
Is it a back up for the boiler
Is it the boier sup;lly or an electric heater that needs wiring

There is too little information sorry
 

Reply to can nyone help with the wiring of an immersion heater? in the Australia area at ElectriciansForums.net

Recommended Sponsor News

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top