come back mk. your MCBs may be skewed, but this takes the proverbial

[telectrix]

had the misfortune to install this today. came with isolator and RCDs. no MCBs .

as you can see, the guts are way out. caused by din rail being badly fixed. close on the left but 1/4" out at the right. all been wired up and fired up, so had to loose the din rail just to get cover on. got another visit for finishing off downlights, so will need to re-drill din rail and fix in alignment. what the buggers had done to get the lid on was to shove the RCDs and isolator to the left side. and the 6 LEDs that come on when you open the lid were no help at all . couples with needing a 3rd hand to hold the lid open whilst juggling the guts into position,

 

[Pete999]

Sorry Pete,that was a joke,you must have realised that ?

Yes I do tend to jump the gun don't I sorry Mate

 

[Dave OCD]

No problem Pete, we can all jump the gun at times.

 

[LewisM]

Need more boards like the old Federal ones, those ----ers didn't budge once they were clipped in.

 

[happysteve]

The left side rcbos have rendered the left side earth bar all but inaccessible.

Inaccessible earth bar? You were lucky. Need to remove a neutral to test insulation resistance on a circuit? No chance!

(Hager board).

 

[NDG Elecs]

why on earth don't they make them 2" bigger all round. then space would not be an issue?

Strangely my wife agreed with your 2" bigger comment...yet she knows nothing about electrics..... !!

 

[Dave Rudderham]

Bloody hell, I thought Reg Prescott had been out again

 

[Richard Burns]

Pro-tek are the main budget brand sold by cpc, preston.

They sell Pro-elec, Protek are another brand, on a similar level of quality.
That CPN board is bad though.

 

[Toneyz]

They sell Pro-elec, Protek are another brand, on a similar level of quality.
That CPN board is bad though.

Lets just say if one was given to me to install the only place for it is in the skip.