Comments - Full Rewire Required - C1 | Page 3 | on ElectriciansForums

Discuss Comments - Full Rewire Required - C1 in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

that looks an excellent report. also you can see what's going on in that CU now. only 1 thnig spotted with EICR.......you have 1363 for main fuse.?. obviously a typo. and i like all those evidential pics.
 
Excellent work / report , hats off to you , I’m amazed you got all that done in the industry standard 15 minutes thou...:)
 
Looks like a good report although it does need a proof read and some points clarifying the references to "Circuit Protective Conductors seen throughout including the lighting circuit. " and then indicating no CPC's at a number of lighting points is a bit confusing
Picture 10 I would add "some" with regard to the remedial work

Was expecting to see Inspected By Marcus Vaughan, Reviewed and Authorised for issue by electriciansforums.net??
 
Very Nice. both the report and the finished terminations in the board.

I would probably disagree with only one coding, but won’t as it’s your call and your the inspector.


Changed my mind.
I would probably C2 an unsecured board, but accept your C3 as it’s your call as the inspector.


One more thing. It takes either a brave, stupid or good sparkie to post there work on here.
I’m not sure if your brave.
I don’t think your stupid..
id conclude, good.
 
Typo on photo 9 - Cloth (clith) - not a criticism, just bringing to you attention.

Wish all the "reports" I got handed to review were as good as this.

(Although to be fair if the reports are good - I never get to see them!)
 

Reply to Comments - Full Rewire Required - C1 in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
380
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
956
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

I don't think I'd use it mate even the one line heading then one long paragraph screams ai. And untrustworthy. I don't think much has been edited...
    • Optimistic
Replies
3
Views
954

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top