Commercial swimimg pool pir | on ElectriciansForums

Discuss Commercial swimimg pool pir in the UK Electrical Forum area at ElectriciansForums.net

Joined
Feb 6, 2020
Messages
104
Reaction score
9
Location
london
I was under the impression that swiming pools needed rcd or rcbo protection on all circuits that serve that location or pass through it. Its a commercial pool

But where I am the pool is feed with rcbos from one board but the board that serves the pool underwater lights pool heater and pumps has no rcbo is that correct?

I have seen the previous fixed wire test and it does not even list the board that supplies the pump under water lights and or heater
 

Attachments

  • [ElectriciansForums.net] Commercial swimimg pool pir
    20210804_135612.jpg
    134.9 KB · Views: 43
What supplies this board? There may be an rcd upstream, or there may be a board fed from this with rcd’s then feeding the lights.

thinking the lights are single phase, these are 3 pole mcbs
 
What supplies this board? There may be an rcd upstream, or there may be a board fed from this with rcd’s then feeding the lights.

thinking the lights are single phase, these are 3 pole mcbs
Board supplied from the main intake i think?

So all the lighting on the room is feed from rcbo

Its just the lights in the pool and the pool heaters and pumps that are not
 

Reply to Commercial swimimg pool pir in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
380
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
956
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

It applies to commercial if it shares the same supply as a dwelling.
Replies
4
Views
576
Adding a led strip isn't going to make much difference to the 3 phase balance. No real difference to where a 3 phase machine uses one phase to...
Replies
2
Views
361

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top