Conduit bending guide

[JCE]

there is a free 4 page guide at easylifetools that can be viewed and printed off

 

[alarm man]

alarm man , you are correct , most of the methods were used 50 years ago , but 32 years ago i was never taught those methods , doing my apprenticeship partly at keighley college , it wasnt until i went back to college say 15 years later and learned some of the methods used on pages 1 & 2 , i then went onto expand on them using the spirit level as i had seen the plumbers /heating engineers on site using , and i expanded on these and other methods, and over the last few days decided to help others , in the hope that they will better my methods and pass on the info , its as simple as that,,,,

mate you want to go on a site and watch old pro,s bend like masters,a squint here,a tilt of the head there and,if by magic it fits to the mil,no rulers no levels just expierence,you cant better that im afraid

 

[Mark_Burgess]

So, you want people to print off the info and are telling them to do it, but want it removed from this forum?
A bit weird that.

Why didn't you just ask to be acknowledged as the author on the post Lenny put up? To be fair, Lenny would not have known who's they are, they are not watermarked and do not have any warnings not to duplicate or distribute!

 

[Mark_Burgess]

mate you want to go on a site and watch old pro,s bend like masters,a squint here,a tilt of the head there and,if by magic it fits to the mil,no rulers no levels just expierence,you cant better that im afraid

Bang on, nail on head. The real way to get on with the job!

 

[alarm man]

So, you want people to print off the info and are telling them to do it, but want it removed from this forum?
A bit weird that.

Why didn't you just ask to be acknowledged as the author on the post Lenny put up? To be fair, Lenny would not have known who's they are, they are not watermarked and do not have any warnings not to duplicate or distribute!

but they dont show anything different from thousands of bending pictures,the principle of bending is the same,it has to be at a certain mark on the former to get your angle,theres no new methods there,wether you use a square to mark the former or mark your bend and measure to a mark on the former or just use your eyes,the wheel has not been reinvented

 

[JCE]

so , here goes , you all made me feel welcome tonight, thank you, i have been kicked ,shot so to speak , but i still have the trunking fabrication guide to upload and give away , so lenny ,johnnny etc... what do i do knowing that this guide just like the conduit guide will /should help newcomers , or perhaps mark ,lenny johnny perhap you could help the newcomers new starter to the industry or am i expecting to much,

 

[oldtimer]

I was brought up bending conduit got to such a pitch that it was a challenge to have an offset a bubble and 2 bends on the one piece or length did I or do I miss it not a bit infact just thinking about it puts me in a cold sweat lol

 

[alarm man]

so , here goes , you all made me feel welcome tonight, thank you, i have been kicked ,shot so to speak , but i still have the trunking fabrication guide to upload and give away , so lenny ,johnnny etc... what do i do knowing that this guide just like the conduit guide will /should help newcomers , or perhaps mark ,lenny johnny perhap you could help the newcomers new starter to the industry or am i expecting to much,

i think it was your second post,seemed to dive in and take the **** out of a respected member,thats the way i seen it anyway..

 

[Guest123]

Look, what you have done is admirable, you've obviously taken the time & effort to produce these guides so offering them for free is commendable.

I only offered the link to the old thread as the guides were in PDF format and thought I would be helping YOU by posting it, unaware that you were infact the author.

Technically, posting the link to YOUR OWN website is in breech of forum rules, regardless of the premis in which it was offered as you have many other items for sale on there.

What you have infact acheived is to advertise your website to over 50,000 members FOR FREE! this makes our sponsors (who pay to advertise) incredibly upset & rightly so.


I feel if your intentions were honourable, you would have offered the guide in a PDF format for anyone to save and/or print off etc.

Also WRT to the missing page 4 of the guide, it is merely a plug for a leveling device you have created, which is why it is not part of the PDF in the link I posted.

 

[JCE]

thank you lenny for you reply , my conduit guide that other people have been giving away for years for free has or could have reduced the christmas donation given to a charity in the moortown area of leeds, combined with hilmor record Irwin tools none payment of royalties for 1500 bush spanners doesnt sit well, most if not all money recieved from the guides and tools will go back into the prototyping and development of other products , most of which are for electricians

the trunking guide took a week of fabrication in the back garden and to be honest i was sick of buying print cartridges when i sold a guide the cable calculation software took 18 months to copy all the cable size tables into and develop in my spare time so if that was stolen i would be gutted , you are correct lenny that it will drive traffic to my web site , to be truthful i dont want lots and lots of sales, all i want is someone to say , yes i used that and it was ok cheers, and that would be good enough, nearly lost my thread if i provided the guides on pdf someone would just sell say test sheets along with other items on ebay, and that wouldnt be fair.
i would like to add an m.i.c.c guide on my site and perhaps a cat 6 data termination guide if anyone can help

 

[alarm man]

are you a spark or a designer,some of the stuff on your site is well,er well,a device that hepls you cut conduit straight? ive never seen the like,if you cant cut straight you have a problem,all your stuff is copies of well known products which offer no extra benefits,the ladder clamps for example,not a bad twist on the original,but are they crash tested,insurance approved.

 

[Mark_Burgess]

If its recognition and praise you are after, why not put a post on the other thread letting all posters know the work you did and that you have more to offer.

I help people out, there is no worries there, if someone that has or is doing their training and cant quite grasp the technic of anything ie: conduit bending, I will show them hands on. I don't think I could produce a manual or training document better than what should be learnt at college. I'd rather help out indirectly by creating and modifying new or existing editable PDFs, thats my input.

 

[Knobhead]

It’s a pity this thread wasn’t deleted as spam when it started. It’s nothing but blatant promotion for a profit making web site.

 

[ruston]

It’s a pity this thread wasn’t deleted as spam when it started. It’s nothing but blatant promotion for a profit making web site.

And I fell for it , I've got a young mate who is starting the 2330 ( or whatever it is now) and NVQ level 3. I thought this would be a help to him , I did'nt realize there may of been an ulterior motive.

 

[JCE]

Ruston you havent fallen for it , just pass on the 4 pages to your mate ,

 

[ruston]

Ruston you havent fallen for it , just pass on the 4 pages to your mate ,

Well I sincerely hope not , I like to look on the positive side , we are all here to help. Thanks for it anyway ,they need all the help they can get these days.