Consumer Unit | Page 3 | on ElectriciansForums

Discuss Consumer Unit in the UK Electrical Forum area at ElectriciansForums.net

G

gedbhoy

Hi all. So I ran a ring main circuit in for dado trunking in a community centre. The cables were taken back to a 3 phase consumer unit which along with the circuit chart had about a dozen breakers marked 'spare'. Guess what? Opened it up and it's packed. The 3 phase supply cabe is too large to drop out and split a phase with a Henley block(to supply a small consumer unit). There is no room to fit another consumer unit with more breakers either. Any ideas would be appreciated.
 
We are all a helpful bunch of people!!! We do this in our spare time and don't get paid. It just wares thin after a while people are constantly getting stuck on simple things. Then run to the Internet and expect others to bail them out. You made the mistake of not checking fully before starting the job. Then when you get stuck you expect others to tell you what to do.
In this case it's a very easy solution. As long as the loading of the board can take the extra load of the circuit. Remove one circuit from the board install a submain and an additional board. Re instate the old circuit and connect your new circuit to the board.

That is the correct way to handle it by the way you were lucky that someone felt sorry for you and spoon fed you the answer. But how do you know the advice given on the Internet is right and correct for your situation. What about if someone advised you to walk off cliff ? Would you follow there advice ? ,would you walk off ??
spare time? i do it in works time, not very often do i come on in my own time, unless there's some carnage going on.
 

Reply to Consumer Unit in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
438
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Question
What is the distance from the point outside the house to the shed?
Replies
8
Views
792
  • Question
Thanks for the replies, I appreciate it.
Replies
4
Views
705

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top