UK could it be misprint?

[banny07]

I had a message from a customer to sort out tripping akitchen circuit mcb. I asked him when was installation tested. He sent me a satisfactory EICR page. Under general condition it says high Zs reading. Ze is 7.25ohm. Could it be misprint? what are your thought guys.

 

[banny07]

The EICR bits shown don't have any final circuit Zs values for additional confirmation of its TT-ness.

It also possible that extraneous bonding is bringing the Zs at DB down to a low enough value as well (crap earth cable / cut-out here, but neighbours pipework bonded on good TN-C-S sort of thing).

Test result page is missing fron EICR. Customer is on holiday I will upload more picture when I visit the property.