Council flat rewire with concrete ceiling and floors??? | on ElectriciansForums

Discuss Council flat rewire with concrete ceiling and floors??? in the Australia area at ElectriciansForums.net

G

Grant M

I have a customer who wants a full rewire of his newly purchased ex-council flat. The problem is the ceiling and floor are solid concrete. The only thing I could think of is to put in false ceilings in throughout. Any other suggestions?
 
If you go with the false ceilings then you can also put some downlighters in if you like.

We did a few flats like this, if you get the ceiling battened out with timber, then cross batten it at 90 degrees, there is no drilling of timbers and it is so easy to wire
 
If the customer will not accept surface mounted trunking through out, (which can look proper nasty) Then a false ceiling with chases down the wall I think is the best option. Remember to let the customer know the work involved and that the price will be alot more. Don't under price it otherwise it's soul destroying! Also remember there are certain depths you are allowed to chase horrizontally and vertically (according to part P). It may be worth avoiding the job. Good Luck.
 
Last edited by a moderator:
I have a customer who wants a full rewire of his newly purchased ex-council flat. The problem is the ceiling and floor are solid concrete. The only thing I could think of is to put in false ceilings in throughout. Any other suggestions?

done alot of these,with care and silicon mini trunking in discreet corners follow skirting and tight to ceiling lines.once painted,after a while customer will not notice.
 
my aunt is moving into a council flat soon and wants all of the trunking removing and the cables to be buried in the concrete walls. are you allowed to chop into concrete in towerblocks though?!:confused:

i'm thinking of suggesting she gets some new skirting boards as the old ones are old and tatty anyway and fitting them onto some timber so they're a couple of inches off the wall, a bit like boxing the cables in. could run the cables in conduit for extra protection. would save about three days of chopping out. :)
 

Reply to Council flat rewire with concrete ceiling and floors??? in the Australia area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
223
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
683
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
625

Similar threads

T
  • Article
Electric underfloor heating onto concrete floor. I have a customer who lives in a 200 year old property. The lounge floor he wants tiled which is...
Replies
0
Views
157
Teign Tiler
T
The challenge that you have with this is that you've no confirmed start point. Because you have a lack of an EICR you don't actually know what...
Replies
7
Views
562

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top