-
Please checkout our new DIY Forum, and any trade that'd like to join and help out, and Contractor Talk Forum.
Discuss Day 5 in the UK Electrical Forum area at ElectriciansForums.net
Reply to Day 5 in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
It is an industrial swarf spinner.
takes shavings (swarf) from machines and spins the cutting oil out of it before lifting it 8m in the air and...
- Question
After fitting out the first room of downlights.... i expect him to get a bit speedier at fitting them
There is so many unknowns to price at this...
Seems very näive to me...
Hi James,
At the inverter end the multi strand is ferruled and torqued in the terminal and at the motor end they are the “wago type” push fitting...
- Blikzoggy
- UK Electrical Forum
- 2
- 290
Back to the Men's Shed today to complete the installation of the 4 LED battens in the attic.
These were a joy to fit, having screwed the units to...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
One House and 2 Consumer units needed by LL, need help with circuitsI have to agree with Baldelectrician on almost everything he says except one ! I wouldn’t be...- Latest: vjsmarwick
-
Repurposing a cooker radial?One thing you may find is that it will most probably be a 6mm cable and to get two of them in to...
- Latest: vjsmarwick
-
UK Ring main or radialI know they spoke about wanting to change to radial circuits for safety as any fault shows up...
- Latest: vjsmarwick
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.