Dimmer switch and normal switch on an intermediate switch | on ElectriciansForums

Discuss Dimmer switch and normal switch on an intermediate switch in the UK Electrical Forum area at ElectriciansForums.net

impish15

Trainee
Supporter
Joined
Oct 22, 2021
Messages
72
Reaction score
27
Location
Bromley
Probably a silly question as I haven’t come across it yet.

On a 2 way switch I assume a dimmable lamp will work ok with 1 switch on a dimmer and the other on a normal light switch? So no dim when the normal light switch is pressed (just on/off) but when the dimmer switch is used the light will be dimmed?

Also assuming the same principle on an intermediate light circuit?
 

Reply to Dimmer switch and normal switch on an intermediate switch in the UK Electrical Forum area at ElectriciansForums.net

Similar threads

  • Question
Thanks davesparks. Looking at the diagram on the driver that's what I interpreted too, but I heard somewhere that the DALI system doesn't like...
Replies
2
Views
483
  • Question
I'd start by doing the usual supply impedance tests followed by N-E voltage with the installation under some load. Also visually inspect and...
Replies
4
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks