Dimplex XL18N storage heater

[Hellmooth]

Hi quick question guys,

I was called out to a storage heater not working, turned out the thermal cut off had tripped, customer doesn't dry any clothes on it and I believe this to be true, I've had to return to it again, I've cleaned it out completely to make sure it wasn't a build up of dust etc, and re set again, it seems to work for a month then trips again, tested the elements they were fine, about 23 ohms if I remember correctly which is what they roughly should be, does anyone know if it would be best to replace the thermal cut out switch or have any other ideas, getting annoying for the customer and myself now, I don't deal with storage heating too often. Thanks in advance!

 

[SPARTYKUS]

Yes change the cutout.

 

[Hellmooth]

Thanks for the reply, is this pretty common on them?

 

[yellowvanman]

Careful, if swapping out because some in that range the cut-out is obsolete and you'll need an upgrade kit.

Upgrade kit itself is easy to fit!

 

[Hellmooth]

Thanks, I have emailed UK spares about it and given them the serial number, hopefully they should be able to tell me if it needs the upgrade kit? Could it be anything else?

 

[davesparks]

If the cutout is tripping and everything tests out fine you are looking at either a weak cutout or a thermostat not switching off. If I remember rightly the cutout and input stat are an all in one unit now so both get replaced at the same time anyway.

 

[yellowvanman]

Thanks, I have emailed UK spares about it and given them the serial number, hopefully they should be able to tell me if it needs the upgrade kit? Could it be anything else?

I used Electric Spares - Heating Spare Parts Delivered Direct to Your Door then search 'repair kit' shows you what is obsolete and the new parts in the pictures.

 

[Hellmooth]

Was going to say that Dave I think they're combined, thanks yellow will look now!

 

[Hellmooth]

That looks exactly what I need yellow, I've sent them an email, cheers for the responses guys appreciated!