DIY wander lead

[gooner1984]

Hi all,

can anyone please give me advice on how to make my own wander lead, ie, what size csa cable and where i can buy it all from, thanks Gary unk:

 

[mayfair]

http://www.electriciansforums.net/i...3-long-lead-cheap-alternative-suggestion.html

 

[telectrix]

iv'e got a part roll of 6mm G/Y. reads 0.04ohms . croc clip on loose end.

 

[Phil]

I have a 75m one in a cassette type reel that I pulled apart. cost about a tenner or so for it all.

 

[LlandrilloSpark]

The cable you want Is tri rated cable, 2.5mm or 4mm, its like panel wire, very flexible , which is what you want ,croc clip on one end and a 2.5 or 4..0 mm jack on the other

 

[ian]

i use a drum of 1.5 singles, croc on one end and a jack on the other, bobs your uncle.

 

[Phil]

 

[SW1970]

Gooner, check out my instructions in this thread here...

http://www.electriciansforums.net/electrical-tools-products/35649-home-made-diy-wander-lead.html