DNO fuse - who can remove it?

[KeenPensioner]

Hi, as my profile says I'm not a sparky but I've wired up the odd light switch and socket! I know my limitations and take safety very seriously but I like learning. I have no intention of ever doing this but can someone explain who can remove the 100 amp fuse to a domestic CU. What is a "competent person" in layman's language? I've trawled the internet (dangerous I know) and can find no definitive answer.

 

[Octopus]

It all depends on who the supplier is! There are some suppliers who will allow registered sparks to pull fuses...

And no you won't find a definitive answer ......

 

[Wilko]

Hi KP and welcome to the Forum !
The fuse is owned and maintained by your DNO company and so they have the say.
Competent Person, as @Murdoch says is not uniquely defined, but there are guides that Competent Person Schemes use to assist in making a judgement (on line if you hunt). My own view is if something went horribly wrong and you were explaining yourself in court one question might be "please explain to us why you felt competent to do this work?" and then what would be an acceptable answer ...

 

[buzzlightyear]

Hi, as my profile says I'm not a sparky but I've wired up the odd light switch and socket! I know my limitations and take safety very seriously but I like learning. I have no intention of ever doing this but can someone explain who can remove the 100 amp fuse to a domestic CU. What is a "competent person" in layman's language? I've trawled the internet (dangerous I know) and can find no definitive answer

in order to pull the DNO fuse .is to insure that the person dose not work live .the electricity work act . e.g. by ask the DNO to put a isolator in
after the DNO fuse before the work is started down to the cost to the customer. the competent person is person that has been inspected
by their body .or fully quilifed to do so.

 

[Octopus]

I wonder why the OP wants to know this?

 

[Dobes_88]

May take the OP a while to reply, think the power to his property has suddenly gone off....

 

[buzzlightyear]

maybe he has blown the main cut out .and gone to the big orange house to find one.

 

[l4urence]

This is documented in 7671 pretty clearly.
See the note after 537.1.3 - only when authorised by the DNO

 

[l4urence]

I wonder why the OP wants to know this?

That's a really good point... wiggling 80A fuses is not a good idea even when you can.

 

[Midwest]

This is documented in 7671 pretty clearly.
See the note after 537.1.3 - only when authorised by the DNO

My DNO authorises me to pull their main fuse, 'cos I pay 500 squids a year to Elecsa.

 

[Octopus]

This is documented in 7671 pretty clearly.
See the note after 537.1.3 - only when authorised by the DNO

Yup - just one of the many glaring issues and errors in the big book

 

[Toneyz]

Years ago anyone doing a consumer unit change would just pull the fuse.Does anyone know of any electrician being prosecuted for doing so ?.

 

[buzzlightyear]

i know of a spark got threatened to be taken to court by DNO
told him to mentation electricity work act .

 

[l4urence]

My DNO authorises me to pull their main fuse, 'cos I pay 500 squids a year to Elecsa.

Bear with me @Midwest but I'm not sure being a member of Elecsa* (*or any other body) does automatically authorise you - It should do I agree. I'm not sure it actually does. Unless you know that Elecsa* have an agreement with the DNO that their members have automatic authorisation.

If push came to shove - who's lawyers would back down first.

Then after it's pulled - it's resealed right but without a seal ID who did it.

 

[buzzlightyear]

Bear with me @Midwest but I'm not sure being a member of Elecsa* (*or any other body) does automatically authorise you - It should do I agree. I'm not sure it actually does. Unless you know that Elecsa* have an agreement with the DNO that their members have automatic authorisation.

If push came to shove - who's lawyers would back down first.

again electricity work act !