Dodgy trade pictures for your amusement! - 1 Million Views! | Page 328 | on ElectriciansForums
Guest viewing is limited

Discuss Dodgy trade pictures for your amusement! - 1 Million Views! in the UK Electrical Forum area at ElectriciansForums.net

D

Darkwood

Right ... Just been nudged to set this up by Paul.M and sounds a good idea following recent threads I've done in the Arms..

Rules....No Offensive material... edit if required before posting as this is the public arena.
Anything to do with the trade or in and around it ...H&S pic's welcome.

[ElectriciansForums.net] Dodgy trade pictures for your amusement! - 1 Million Views!

I've posted this a few times and this is at a mates house following a kitchen refirb several yrs ago. :eek:mg_smile:

[ElectriciansForums.net] Dodgy trade pictures for your amusement! - 1 Million Views!
 
I would have thought sprinklers were perfect for what they do
They are - simple, reliable, effective, and relatively low cost.
Is this a problem the heads being knocked ?
The problem is in the stock rooms. All it takes is one careless forklift manouver and you've popped a sprinkler - then water gushes out and all the stock in tne vicinity is damaged. And for good measure, when tbe water flows the fire alarm goes off and you have a load of "annoyed" customers who have to be kicked out.
 
Surely in those sorts of areas the heads would be installed on the top of the pipe rather than underneath? In ceilings, recessed heads can be fitted that sit flush with the ceiling to prevent damage. These are good for domestic use as well as they are discreet. Sprinkler systems are great. I've been to 3 places that have had fires and sprinklers. In all 3 cases the sprinklers extinguished the fire before it spread beyond the room the fire started.
 
Ah, but now you are into the realms of "workmanship vs speed/cost". Just like we see much ekectrical work done down to a price, same thing with sprinklers.

And while I don't know what they are, there are rules about how sprinklers must be installed. I recall that our warehouse guys had just finished putting solid shelves on the racking when they were told that it either had to be open (slatted) or they'd have to add sprinklers on each level - they bought in a load of slatted shelves and had a big pile of surplus ply.
 
shame i binned it. took one of them out the other week, pristine condition. you could have had it for £100. it had "failed" EICR through no RCD.
 
The décor and red wires in the photo's from @Doomed remind me of a house in Coventry that I'll never forget. I ended up learning a lot about the former occupant as I got to know the family quite well. The guy was a retired RAF engineer, and former safety officer at Alvis and Dunlop works. He'd seen service overseas and been torpedoed/shipwrecked twice. He had a good innings and died aged 91.

He'd apparently (genuinely) been given a Wylex rewireable CU as a birthday present a few years previously but that was where anything standard ended. The house was entirely wired in 6mm red singles because according to his daughter he refused to spend a penny unless required and someone had donated several drums of it to him. (N and Earth were red throughout too). At every fitting there were solder and heat shrink connections to smaller conductors.
In addition there were some incredible inventions throughout the house including a remarkably engineered home made stair lift, curtains that opened and closed on a time clock, and even a crane to lower him into the bath. There were massive anchorages on the walls of the living room with ropes so he could pull himself around. The scene in Home Alone looked quite pathetic compared to his house!

In the back garden was a self-built winch for towing in his caravan powered by a three phase motor. This caused some confusion as the house has a single phase supply. Further investigation revealed a conductor running (apparently by agreement) to next doors shed. There was no 3rd phase connected but I did find a long lead that I think he used to hook it up as required so I reckon he had a deal with another neighbour.

I can only find two photo's from this and neither show the electrics, one was inside his workshop and I also noticed a rather incredible old magazine article which was apparently a Morris or Dunlop works magazine detailing how he had added an extra gearbox into a car to provide more ratios for towing his caravan. This intrigued me so much the daughter kindly later sent me a copy of it.

The guy was clearly an amazing mechanical engineer and obviously knew exactly how it all worked. I bet the occupant of the house in the other photos is a similarly interesting character.
[ElectriciansForums.net] Dodgy trade pictures for your amusement! - 1 Million Views![ElectriciansForums.net] Dodgy trade pictures for your amusement! - 1 Million Views!
 

Reply to Dodgy trade pictures for your amusement! - 1 Million Views! in the UK Electrical Forum area at ElectriciansForums.net

Recommended Sponsor News

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top