Dodgy trade pictures for your amusement! - 1 Million Views!

[Darkwood]

Right ... Just been nudged to set this up by Paul.M and sounds a good idea following recent threads I've done in the Arms..

Rules....No Offensive material... edit if required before posting as this is the public arena.
Anything to do with the trade or in and around it ...H&S pic's welcome.



I've posted this a few times and this is at a mates house following a kitchen refirb several yrs ago. mg_smile:

 

[Wilko]

Open it open it, we want see what's inside !!!

 

[telectrix]

Back at the DIY disaster again today.

that conduit looks as if it was made by Nissan.

 

[sweet212]

The classic home made maintenace free joint box.

Step 1 Leave existing metal back box in the wall.

Step 2 Remove all cable grommets and ram in new cables so they can snag upon entry.

Step 3 Use 20A wagos to connect ring final circuit and load. Remember to cross the load and ring neutral over.

Step 4 Cut the back from another metal back box and screw up tight

Step 5 Use a marker pen to put an MF label.

When finished with the ring do the cooker next.

Its a new one for me.

 

[Toneyz]

No protection for the customer's worktop then?

 

[DPG]

As above, hope the worktop is due for replacement as part of the job.

 

[telectrix]

tragedy here is his chisel has broke a tooth off.

 

[freddo]

PVC trunking installed on the front of a church.

New submain cable installed more discreetly alongside existing supply cable.

 

[Rpa07]

God will appreciate the care you took!
Nice job.

PVC trunking installed on the front of a church.
View attachment 48257
New submain cable installed more discreetly alongside existing supply cable.
View attachment 48258

Not much angle on that ladder, I take it that you adjusted 4:1 before you ascended.
I think that was the angle of the ladder Jacob saw with the angels ascending and descending. Mind you, they weren’t carrying battery drills!
(Sorry Lord for my flippance)

 

[freddo]

God will appreciate the care you took!

It hasn't happened yet, been working with great care in 2 churches for the past month, every time I go to work outside it pours down, took several attempts to fix that cable to avoid the wind and rain!

Not much angle on that ladder, I take it that you adjusted 4:1 before you ascended.

The angle is more than it looks in the photo!

 

[Silly Sausage]

PVC trunking installed on the front of a church.
View attachment 48257
New submain cable installed more discreetly alongside existing supply cable.
View attachment 48258

Good God!!!
I've always said that white pvc trunking is the spawn of The Devil.

 

[Wilko]

This GU10 fitting was buried under insulation and had been cooking for a while before it started tripping. Scorch makes on ceiling joist etc.

 

[MG201]

The classic home made maintenace free joint box.

Step 1 Leave existing metal back box in the wall.

Step 2 Remove all cable grommets and ram in new cables so they can snag upon entry.

Step 3 Use 20A wagos to connect ring final circuit and load. Remember to cross the load and ring neutral over.

Step 4 Cut the back from another metal back box and screw up tight

Step 5 Use a marker pen to put an MF label.

When finished with the ring do the cooker next.

Its a new one for me.

View attachment 48241

View attachment 48242

I’m just wondering wat was in the other MF backbox

 

[freddo]

I still can't believe they actually wrote MF onto those covers!

 

[Rpa07]

I think it's their signature - he he!

 

[freddo]

I think it's their signature - he he!

That's also 2/3 of my initials!