Does 1mm SWA exist?

[1Justin]

I was on a domestic site the other day in the pitch dark, surveying for a customer who has a skinny 4 core SWA laid to their shed already and now wants a 13A socket. It was not possible to make out the cable embossed markings since they were underground, but my vernier caliper on a single strand (7 strands per core) made it much closer to 1mm^2 (0.426mm dia) than 1.5mm^2. (0.522mm) (The difference per strand being is only < 0.01mm).

So..1mm SWA. I can't find anyone listing it, - does it exist?

If not, I might assume this is 1.5mm and -it was my semi-frozen calipers which were the problem.

 

[Andy78]

I think that 1.5mm is generally the smallest. Maybe not your calipers off but possibly just poorly produced cable ?

 

[1Justin]

I think that 1.5mm is generally the smallest. Maybe not your calipers off but possibly just poorly produced cable ?

Well so it might be, a copper saving for grey imports. I'll see if anyone else has ever seen 1mm SWA! Thanks.

 

[7029 dave]

I have only seen 1.5mm.

 

[Wilko]

For what it's worth, I looked at a few sources I use and smallest listed was 1.5.

 

[Wonderwall]

It dosent exist.

 

[LeeH]

I've only seen 1.0mm in twisted pair.

 

[The Ghost]

I use a micrometer to measure it is more accurate.

 

[westward10]

No such thing although the Chinese may produce it claiming it is 1.5.

 

[FatAlan]

Out of interest, in respect of CSA of conductors do the measurements actually relate to the real CSA of the conductor i.e. as pi r 2 or are they more closely related to the diameter?

 

[1Justin]

Out of interest, in respect of CSA of conductors do the measurements actually relate to the real CSA of the conductor i.e. as pi r 2 or are they more closely related to the diameter?

You are not making your question clear Alan. Care to re-phrase? (There are normally seven conductors in the stranded cables we use. Measure diameter of one, work out CSA. You did that at school)

 

[LeeH]

CSA. cable is measured in mm2

 

[FatAlan]

When a conductor is referred to as 1mm square is that based on the actual circular CSA of the conductor or is it based on the cable being 1 mm in diameter?

 

[LeeH]

Answer is above!!

CONDUCTOR SURFACE AREA!!!

 

[telectrix]

not surface area. cross sectional area. or π r²