Domestic Board schedules

[pritch]

With advise from Nic ive been sellotaping an hand written board schedule to the front of the new board in peoples houses which I must admit looks a bit of a mess. Am I missing a trick or is this what you all do?
cheers

 

[Smugley]

I don't, just clearly label the board and rest of details on the EIC. This is okay by my ELECSA assessor, don't know about NICEIC. You can get labels though which might be a bit neater if you wanna put everything on display. You can get these: http://www.tlc-direct.co.uk/Images/Products/size_3/BKGCD1.JPG but they are just a copy of the Schedule of Test Results which doesn't exactly satisfy 514.9.1.

 

[malcolmsanford]

With advise from Nic ive been sellotaping an hand written board schedule to the front of the new board in peoples houses which I must admit looks a bit of a mess. Am I missing a trick or is this what you all do?
cheers

Just as part of my service I would print of another copy of the schedule of results from the BS 7671-2008 laminate this and then punch 4 brass eyelets through it and then attach this at the origin of the installation.

Commerical boards or industrial becasue they are normally larger I would do the same laminate a copy of the results but glue an A4 plastic envelope inside the front cover of the DB abd then place the laminated copies inside this.

 

[Amp David]

I use the small self adhesive one shown in post 2 for domestic. Anything other than domestic a copy of the schedule of tests for me in clear wallets.

 

[Octopus]

With advise from Nic ive been sellotaping an hand written board schedule to the front of the new board in peoples houses which I must admit looks a bit of a mess. Am I missing a trick or is this what you all do?
cheers

What exactly do you mean by schedule? The page from the EIC?

 

[malcolmsanford]

The easiest to use is the schedule of tests result part of the EIC, as that will include everything Reg 514.9.1 needs.

 

[Silly Sausage]

Malcolm - 'Commercial boards or industrial becasue they are normally larger I would do the same laminate a copy of the results but glue an A4 plastic envelope inside the front cover of the DB abd then place the laminated copies inside this.'


On my testing travels it is such a joy to find DBs like this!

 

[pritch]

Could we not use the Schedule from the EIC and fold it to show circuits and then place that next to or on the board?

 

[pritch]

Just as part of my service I would print of another copy of the schedule of results from the BS 7671-2008 laminate this and then punch 4 brass eyelets through it and then attach this at the origin of the installation.

Commerical boards or industrial becasue they are normally larger I would do the same laminate a copy of the results but glue an A4 plastic envelope inside the front cover of the DB abd then place the laminated copies inside this.

You would put a laminate copy of the results on the wall next to the board in someones hallway or where ever?dont think my customers would be happy with that.

 

[malcolmsanford]

No your quite right if the CU was on show there would be a good chance that I would do it another way. But whichever way you want to do it i'm sure your customers will be delighted with your efforts.

 

[telectrix]

i try and write/type a legend for the circiuts sized to fit inside the flap of the CU.