Double 1mm T+E clips

[GB Electrics]

Hello,
Does anyone know who makes or sells double 1.0mm T+E clips, not the 1.0/1.5 type . I’ve had them in the past and they hold 1mm much better than the 1.0/1.5 type. Can’t remember the brand or where I got them.

Thanks

 

[nicebutdim]

Something like these from Tower/Schneider?

70CGKF10 - Tower - nail clip for flat cable - 2 x 1 mm² - grey - set of 100 | Schneider Electric UK

70CGKF10 - Tower - nail clip for flat cable - 2 x 1 mm² - grey - set of 100

www.se.com

 

[GB Electrics]

Something like these from Tower/Schneider?

70CGKF10 - Tower - nail clip for flat cable - 2 x 1 mm² - grey - set of 100 | Schneider Electric UK

70CGKF10 - Tower - nail clip for flat cable - 2 x 1 mm² - grey - set of 100

www.se.com

Thanks for the reply nicebutdim, I’m afraid that’s the code for single cable clips , Schneider only seem to have doubles in the 1.5 and 2.5 sizes. Which are 70cgkdf15 or 25.

 

[nicebutdim]

Thanks for the reply nicebutdim, I’m afraid that’s the code for single cable clips , Schneider only seem to have doubles in the 1.5 and 2.5 sizes. Which are 70cgkdf15 or 25.

You're correct and I apologise for the mistake. Off the top of my head the only manufacturers of double width clips were Tower and LAP and neither seem to offer them for 1mm.

I'm surprised by this, given the widespread use of 1mm in mainland UK
[automerge]1594592587[/automerge]
These are offered as 1mm, but they're Unifix and I suspect they're the 1-1.5mm clips you don't want.

Can't find any specs to confirm.

 

[ipf]

I remember using double T+E clips in the past, for dressing but haven't used them for donkeys years. Basically, they are too weak to hold the outer of the 2 cables these days....and it's much easier using singles. I'll bet I have some tucked away somewhere.....if I come across 'em I'll probably bin 'em.

 

[Dustydazzler]

Blimey haven’t used double clips in probably a decade or more...
two 1mm cables will probably sit quite nicely under a 6mm clip..

 

[littlespark]

Clips?
what are you lot talking about?

 

[Dustydazzler]

Clips?
what are you lot talking about?

you know...an alternative to a bent nail

 

[Andy78]

Double clips ?

 

[Dustydazzler]

Double clips ?

yes , tower used to make A range of plastic t & e clips Which could hold 2 cables at once side by side...

 

[GB Electrics]

You're correct and I apologise for the mistake. Off the top of my head the only manufacturers of double width clips were Tower and LAP and neither seem to offer them for 1mm.

I'm surprised by this, given the widespread use of 1mm in mainland UK
[automerge]1594592587[/automerge]
These are offered as 1mm, but they're Unifix and I suspect they're the 1-1.5mm clips you don't want.

Can't find any specs to confirm.

Thanks nicebutdim . I’ll order some out of curiosity . Your right it’s surprising as 1.0mm is surely more popular than 1.5mm these days . Appreciate your help mate.

 

[telectrix]

i've still got a few from back in the days of running 4 alarm cables in double 1.0mm clips.these were white, though
[automerge]1594631435[/automerge]
nearest i can find is here:

LAP Cable Clips Double Grey for Twin & Earth Cable 1-1.5mm Pack of 100

Order online at Screwfix.com. High quality grey moulded cable clip with steel masonry pin. For twin and earth cable. FREE next day delivery available, free collection in 5 minutes.

www.screwfix.com

 

[GB Electrics]

i've still got a few from back in the days of running 4 alarm cables in double 1.0mm clips.these were white, though
[automerge]1594631435[/automerge]
nearest i can find is here:

LAP Cable Clips Double Grey for Twin & Earth Cable 1-1.5mm Pack of 100

Order online at Screwfix.com. High quality grey moulded cable clip with steel masonry pin. For twin and earth cable. FREE next day delivery available, free collection in 5 minutes.

www.screwfix.com

Thanks telectrix, I’ve tried the lap ones and they are for 1.5mm

 

[telectrix]

Thanks telectrix, I’ve tried the lap ones and they are for 1.5mm

you can use them along the cable run,but they won't grip tight. at the ends, use separate 1.0mm clips

 

[GB Electrics]

you can use them along the cable run,but they won't grip tight. at the ends, use separate 1.0mm clips

Thanks , not a bad idea , I’m in the queue for screwfix as I type so I’ll get a box to try until the others arrive .
Cheers