Double float switch fitting.

[PaulBP]

I have just obtained a double float switch , with a HH54P Relay 14 pin, 24V DC , can anyone give me a wiring diagram ? TIA

 

[brianmoooore]

What do you mean by 'a double float switch'? One that trips a switch at a minimum level and another at a maximum level?
The relay you mention is a 4 pole change over one (4PDT). The connections for it are normally printed on the case, but it isn't obvious how or why this would be used with a float switch.

 

[SparkyChick]

@PaulBP ,

As has been suggested, you will need to provide a lot more information about the items you have and the intended purpose.

 

[brianmoooore]

To answer one of my own questions, I see you are in France, so presumably a 3Ph supply and pump. This would explain the need for a relay of at least 3P, in the absence of a 3P float switch.

 

[PaulBP]

What do you mean by 'a double float switch'? One that trips a switch at a minimum level and another at a maximum level?
The relay you mention is a 4 pole change over one (4PDT). The connections for it are normally printed on the case, but it isn't obvious how or why this would be used with a float switch.

The relay is the one that was recommended with the float switch. The float switch is for use to control the level of a pond, controlling flow of osmosis water supply. There is no printing on the case .