Down lights and transformers | on ElectriciansForums

Down lights and transformers

Discuss Down lights and transformers in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

B

Barry roberts

-
Joined
Nov 5, 2017
Messages
3
Reaction score
1
Location
London
Hi , just looking for some advice on some downlighting and where I stand , a client has provided me with 4 transformers with thermal cut out for there 4 down lighters which are not working , upon inspection of the 4 the down lighters themselves are not fire rated (ground floor flat) (2 story building) , I've reccomended replacing the spot lights to fire rated ones but the tennant declines , where do I stand in just replacing the transformers them selves ? Am I liable for the spot lights that i have changed the transformers on??? Note : no signs of thermal damage on the spot lights , no signs of thermal damage to the cable , no insulation covering the spot light and a gap of roughly 5 inches between plasterboard and floor above (wood floor above)
and the spot lights are in the bedroom, bathroom and 1 in the hallway.
Thanks
 
Murdoch said:
I would change the lamps to GU10 LEDs and scrap the transformers...
Click to expand...
I agree, however I'd also replace the down-lighters. Fire-rated GU10 down-lighters are so cheap (even fore big brand names) that it seems silly not to.

Murdoch said:
Surely it's up to the landlord ...
Click to expand...
Also agree, the landlord holds the responsibility and will most likely go ahead with changing the down-lighters for fire-rated ones, small price to pay for peace of mind.

I actually did a job just like this recently, in a owned house rather than a rented flat however. The customer was complaining that their existing "down-lighters would get very hot and the bulbs would fall out, smashing on the floor". I removed all the existing lamps and transformers, changing them for fire-rated GU10 LED down-lighters which where really good value-for-money (LAP brand), didn't get hot, and saved a fortune on their electricity bill while also being safer.
 
Last edited:

Reply to Down lights and transformers in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

News and Offers from Sponsors

PCBWay
  • Article
Meet PCBWay at electronica A1.163
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
271
PCBWay
PCBWay
Electrical2go
  • Sticky
  • Article
📢 Best Sellers Catalogue Now Available! 📢
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
766
Bob Labla
B
Dan
  • Article
The Official Sponsors of ElectriciansForums - There are currently 8
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
774
Dan
Dan

Similar threads

L
Replacing a GU10/MR16 downlight above the stairwell
I'm not sure on the environmental implications, a good quality integrated fitting will last many years and be more energy efficient than the GU10...
    • Like
Replies
13
Views
1K
davesparks
D
A
Help needed again pls - Lighting fault tracing
SOLVED Thanks for all the help. It was nothing to do with the smoke detector. In this new hole (where there will be a light fitting) three white...
    • Like
2
Replies
24
Views
3K
AJB Temple
A

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top