DPN5 Tick Sheet Explained

[Edd]

Hi Edd
What a fantastic post, it a very helpful list you have compiled and is going to be very useful to a lot of people.
I am new to the forum, and this is my 1st post.
is there any way i could get all this on one sheet to print off and also put onto my ipad.
Many thanks in advance.

Ive Pm'd you, not sure you can PM untill you have more posts under your belt, let me know.

 

[ecasam]

Cheers, very useful.
Thank you for taking the time.

 

[academy]

Cheers Edd, I have sent you a pm

 

[sparkyvr]

Excellent work Edd, Very much appreciated.
Should make wonderful bedtime reading! LOL!
Any chance of a pm of all the info on one sheet, so i could print and laminate.
Once again, many thanks

 

[Deleted member 72666]

Thanks Edd for taking the time to post this very useful info!

 

[skydog1]

great post ta

 

[nowaypedro]

Edd - a great piece of work, much appreciated

 

[peterhardacher]

That's most helpfull that thanks

 

[electrosparks]

Wow what patience you have ed.great work thanx for helping.if youever come to dagenham I will buy you abeer or two.

 

[TreeFaze]

Sterling job Edd, obviously taken a lot of time and effort, can't fault you pal:34:

 

[comptonspark]

thanks great post

 

[Stompy2]

Great essay---- I think this will be very handy.

 

[rattlehead85]

Great article and very helpful on-site. I do tend to disagree a tad regarding M.E.T. There is not actually a code warranted for bonding connected directly into a fuseboard so long as it is clearly marked and identified and removable only by use of s tool but i would say it is open to interpretation.

 

[Edd]

Great article and very helpful on-site. I do tend to disagree a tad regarding M.E.T. There is not actually a code warranted for bonding connected directly into a fuseboard so long as it is clearly marked and identified and removable only by use of s tool but i would say it is open to interpretation.

Sry been away from here for a while. I agree with you, trouble is I use Click software NICEIC indorced! and they have in it pre wrighten items, and in the C3 section this is what comes up. so ive added it here. But yes I completely agree, but someone at the NIC has desided it needs mentioning!!

 

[Badged01]

Sry been away from here for a while.

Was that at Her Majesties pleasure or just taking a break ...... :detective: