Hi dudes. Need to source a mem/ eaton rcbo for a new shower. Do you think I should sack it off and fit a separate rcbo shower consumer unit ? Thanks
Discuss Eaton rcbo in the UK Electrical Forum area at ElectriciansForums.net
Reply to Eaton rcbo in the UK Electrical Forum area at ElectriciansForums.net
News and Offers from Sponsors
- Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
- Sticky
- Article
Good to know thanks, one can never have enough places to source parts from!
- Electrical2go
- Forum Sponsor News and Offers
- 4
- 800
- Article
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
- Dan
- Forum Sponsor News and Offers
- 0
- 831
Similar threads
- Question
You'd have to be mindful of SPD conductor lengths doing it that way.
I think Matt:E make a single board with Type A RCBO, openPEN detection and...
- Brownie91
- UK Electrical Forum
- 1
- 987
If two tariffs are sufficient, and you don't need too many ways, you can easily add an SPD kit to the Fusebox F2014DT dual tariff board. The only...
- North88
- UK Electrical Forum
- 1
- 302
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Is this relay suitable for 3kw Willis HeaterI would use a din rail dp contactor in an enclosure...- Latest: mainline
-
Reducing 20v ac to 6v acAre you sure you wired it correctly, did you measure the voltage at the lamp. AC regulators...
- Latest: mainline
-
Thermostat ProblemI have been through your post and the green light is showing on the BDR91 all the time. I looked...
- Latest: Chewy56
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.